Amps
[Top] [All Lists]

[AMPS] 3-500Z filament voltage

To: <amps@contesting.com>
Subject: [AMPS] 3-500Z filament voltage
From: KA2YKC@aol.com (KA2YKC@aol.com)
Date: Sun, 31 Jan 1999 21:00:41 EST
In a message dated 1/31/99 5:40:25 PM Eastern Standard Time, royanjoy@ncn.net
writes:

<< Monty...
 
 For gosh' sakes, contact your power company about that outrageously high
 line voltage! They are supposed to keep it well within specified limits--not
 nearly that high. They will come out and adjust it for you. (It must have
 been coffee-shop time when they installed that polepig, and forgot to return
 after the 1-hour break to adjust the tap). That much voltage can damage
 other appliances as well as fils. Of course, maybe you like the boosted QRO
 from the B+ increase?
 
 73,     K6XK >>


What is the recommended line voltage ?  I also seem to be on the high side
here @ approx. 245VAC.

Nuclear generating station only 3 miles away !

73
Eric

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>