On Fri, 2 Apr 1999 03:33:05 -0500 "Dick Green" <dick.green@valley.net>
writes:
>
>Hmmm. Indeed I must be remembering it wrong. The SB-200 used a pair
>of
>572B's I think, and I see from my triode table that the 572B is
>typically
>run at 2400 volts, so I guess it wasn't that old SB-200 after all. I
>have a
>strong recollection that it was 600 volts, so maybe it was some other
>amp or
>an old tube transceiver I was working on. Can anybody think of a
>common ham
>PA or final that would have run at 600 volts on the plate?
Most of the tube final xcvrs ran 600-900V. Sweep tube amps are in the
same area.
If ur a real old fart then the Johnson Vikings 1, 2 Ranger and Valiant
ran around 600V !
73 Carl KM1H
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|