>Rich...
>
>Are you singing a symphony with KRR-AK? I can't tell whether he's a) one of
>those bright but strangely weird contemporary comedians or b) too much
>involved with his self-assigned call.
>
? Thanks for the heads-up on the callsign. My guess is that he could be
around as long as an average meteor shower.
>
- cheers, Dick
>
>
>
>
>
>----Original Message-----
>From: Rich Measures [SMTP:measures@vc.net]
>Sent: Wednesday, July 28, 1999 8:12 AM
>To: Jerry Devine; amps@contesting.com
>Subject: Re: [AMPS] Good Meter vs CRT was Hot wire....
>
>
>......
>>I say this is still flawed! Not a good enough answer. Everything has
>>to be accounted for Tom. This isn't as easy as the IRS's EZ-FORM.
>>
>? Yeah, Tom's "explanation" came up short on science. However, you
>gotta know when to fold. Arguing with Tom is sorta like arguing with a
>'gator.
>
>>>Outgoing power readings include both forward and reflected power
>>>that was "bounced" off the PA output port.
>>
>>And I thought it checked into the tankard to hang out and have a few...
>>But I beleive it bounced off of there for now. Somehow this has
>>a familar ring to it...
>>
>? Indeed.
>
>>>That's why directional coupler wattmeters read higher when the load has
>>a
>>>high SWR and the transmitter is matched to the new feedline impedance.
>>>Reverse power reads only the reflected power, so you can simply subtract
>>
>>>the reflected power out from the forward reading and you have true
>>>forward power.
>>
>>Within 8% with a Bird 4314B. All measurements. So you could have up to
>>16%
>>total error in a >1:3.0:1v.s.w.r., with two different peak reading
>>values. And thats before we even consider all the variables you missed
>>that error you.
>>
>>It's got be real love Tom or no Love at all! The F.C.C. isn't interested
>>in your approximations. And personally neither am I. 1500 watts P.E.P.
>>no 1515w P.E.P. (1%) at the antenna feed point. The most we could run
>>with your methods under worse case is 1260w P.E.P. to be safe.
>>And under the best conditions we could run at 1620w P.E.P. pushing
>>limits and safely only 1380w P.E.P.
>>
>>I side with Rich and my amp manufacture aswell as my better judgement.
>>And I don't really care if you want to attach a 50ohm load instead
>>of the antenna it makes no difference. Your still way off.
>>
>? The FCC inspected a station in Daly City, CA. The measured power on a
>Bird was 1700w PEP. The FCC did not write him up. , , , Can you
>imagine the highway patrol giving a ticket for 17mph when the speed limit
>is 15mph?
>.
>- cheers, Jerry.
>
>
>Rich...
>
>R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
>
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|