>
>
>>Don't I recall that you (and maybe others) have indicated that this is
>the
>>proper way to tune for best IMD --- set up at full power and then reduce
>>the drive?
>: ...and some others approve tune-up at full smoke - followed
>: by a small increase in loading. I doubt that increasing loading a tad
>
>: makes a noticeable improvement.
>
>I've seen a few mfgs mention the increase loading procedure in their
>tune up information. I've never measured it, but they indicate it's
>significant enough to place into practice.
>
Skipp -- In the real world of -32db radios, improving a 3-500Z amp's imd
from say -39db to
-40db is not very likely to be noticed. .
- cheers
>________________________________________________________________
>YOU'RE PAYING TOO MUCH FOR THE INTERNET!
>Juno now offers FREE Internet Access!
>Try it today - there's no risk! For your FREE software, visit:
>http://dl.www.juno.com/get/tagj.
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|