Kevin....
Using the KD9JQ "triode" software and your parameter of 2250 volts, it comes
up 46 ohms. I figured it for 1000 watts out. Drive requirement is listed as
27 watts, grid dissapation of 2.2 watts and cathode bias of 7.2 volts. Plate
load would be very close to 2000 ohms.
Good luck.
Dick, K5AND
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|