Thanks Dick and Phil,
Close enough for me :-)
73,
Kevin
KB9UPV
----- Original Message -----
From: Dick Hanson <dhanson@southernstaircase.com>
To: 'Kevin Polchan' <kpevin@mediaone.net>; <amps@contesting.com>
Sent: Wednesday, April 05, 2000 10:21 AM
Subject: RE: [AMPS] 3cx800a7 input impedence
> Kevin....
> Using the KD9JQ "triode" software and your parameter of 2250 volts, it
comes
> up 46 ohms. I figured it for 1000 watts out. Drive requirement is listed
as
> 27 watts, grid dissapation of 2.2 watts and cathode bias of 7.2 volts.
Plate
> load would be very close to 2000 ohms.
> Good luck.
>
> Dick, K5AND
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|