Amps
[Top] [All Lists]

[AMPS] Copper tube - semi-rigid

To: <amps@contesting.com>
Subject: [AMPS] Copper tube - semi-rigid
From: phil@invest.fsbusiness.co.uk (phil)
Date: Fri, 28 Apr 2000 19:55:53 +0100
Mark,

>Can anyone please help me find copper tube for a pi-tank 
>coil for a 160 thru 10m 4CX1000A amp?
>
>8mm O.D. is easily obtained but I need 4 or 5mm
>OD, and a continuous piece about 5m (16ft) long.
I done a search on 'copper tube' and found a distributor in Cardiff I
believe. Sorry I don't have his details.

He had some 5/16 AND 3/8 diameter. This is the same or very similar to
that used to make copper brake pipes on classic cars and such like.

8mm is standard fine plumbing tubing and most good plumbers merchants
stock it.

Hope this 2p is of some use.

(((73)))

Phil  G4ZOW


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>