Good enough ? It is excellent. It can even measure a difference of 1pF
reliably. I think the 0.01pF resolution is a bit optimistic and the
calibration is not perfect on my version, but it is good enough.
> One not too expensive device is the Almost All Digital Electronics L-C
> meter. It's cheap, pretty accurate, and comes as a kit that took me under
an
> hour to build. It is worth changing the 5 volt regulator to a low drop out
> type, though, as you get a lot more effective battery life.
>
> Of course, it doesn't measure at the operating frequency, but for most
> inductors at HF, it's good enough.
>
> 73
>
> Peter G3RZP
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/ampsfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|