Amps
[Top] [All Lists]

[AMPS] Emtron DX1

To: <amps@contesting.com>
Subject: [AMPS] Emtron DX1
From: 2@vc.net (measures)
Date: Fri, 26 May 2000 07:50:40 -0700
>Rich says:
>
>>note -- High-pressure centrifugal blowers have relatively narrow, large 
>>diameter squirrel-cages that operate at c. 3400 rpm. 
>
>Unfortunately, they are also noisy. Quiet blowers producing lots of air flow
>have large wheels, go slowly, but don't necessarily work well under the back
>pressure requirements (I guess if it was big enough, it might be OK) - and 
>Rich
>has highlighted the fact that you will have a lot of back pressure. The 
>idea of
>a remote big blower is probably the best for quietness but it will need to be
>big to get over the losses in the duct work.
>
>Maybe amps with radiation cooled glass tubes and modest air flow requirements
>have advantages if you live at high altitude, although it's not something 
>that
>I've ever had to consider.
>
The SB-220 uses a heavily-loaded impedance-protected motor.  As altitude 
increases, the fan blade turns faster due to decreased air density.  I 
would have no qualms about using a SB-220 at 10,000 ft. altitude - 
provided the fan was oiled.  . 
>
>Peter G3RZP
>
>
>
>


-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>