Amps
[Top] [All Lists]

[AMPS] HV Fusing / Diode Protection

To: <amps@contesting.com>
Subject: [AMPS] HV Fusing / Diode Protection
From: siezzi@aeronix.com (Steve Iezzi)
Date: Mon, 12 Jun 2000 10:59:32 -0400
I have used the Metal Oxide resistors available in Digi-Key (Panasonic and
Yageo) for the same purpose.  They are flame retardant and handle high surge
currents.

0.82 ohms is listed as a stock value in 2 watt rating.  High voltage may arc
across the small body when open but that's still preferable to the short
circuit situation.

Steve KT4FY



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>