[AMPS] Gound fault

Amps

[AMPS] Gound fault

To:	<amps@contesting.com>
Subject:	[AMPS] Gound fault
From:	Geo. W7LFD" <gclute@home.com (Geo. W7LFD)
Date:	Thu, 9 Aug 2001 14:03:49 -0700

I've used my Astron 35m to power my Icom 745, and I tried to use the same
12VDC source to power the relay in my Drake L4 B amplifier.   A dead short
through the Icom is the result.  What is the best way to isolate the Icom
internal relay for switching the Drake...or maybe just use another 12VDC
source?

Geo W7LFD


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Linear AMP timing, (continued) [AMPS] Linear AMP timing, 2 [AMPS] Linear AMP timing, kl7ra [AMPS] Linear AMP timing, 2 [AMPS] Linear AMP timing, 2 [AMPS] Linear AMP timing, Bill Turner [AMPS] Linear AMP timing, Tom Rauch FW: [AMPS] Linear AMP timing, Paul Hewitt [AMPS] Linear AMP timing, 2 [AMPS] Linear AMP timing, 2 [AMPS] Linear AMP timing, 2 [AMPS] Gound fault, <gclute@home.com (Geo. W7LFD) <=

Previous by Date:	[AMPS] Linear AMP timing, 2
Next by Date:	[AMPS] Gound fault, Billy Ward
Previous by Thread:	[AMPS] Linear AMP timing, 2
Next by Thread:	[AMPS] High-Speed Switching parts kit [p/n47], 2
Indexes:	[Date] [Thread] [Top] [All Lists]