Amps
[Top] [All Lists]

[Amps] skin effect

To: <amps@contesting.com>
Subject: [Amps] skin effect
From: Joseph DiPietro" <n2uf@joeham.net (Joseph DiPietro)
Date: Fri, 4 Oct 2002 15:23:57 -0400
Steve,

The advantage of regular stranded wire is flexability.
Litz wire is a special type of stranded wire that is used to reduce skin
effect.
At 60Hz the skin effect is not an issue.

Joe D

----- Original Message -----
From: "Steve M" <wmoorejr@cox.net>
To: <amps@contesting.com>
Sent: Friday, October 04, 2002 2:42 PM
Subject: [Amps] skin effect


> Hi everybody,
>
> Assuming the same gauge, is a stranded conductor better than a solid
> conductor [less skin effect loss because of multiple conductor surfaces]
at
> rf? How about at 60hz?
>      Also can someone point out a good source for this info on the web?
I've
> tried several google searchs with limited results and no answer to the
> stranded versus solid or tubing conductor.
>         This subject is a current topic on another reflector. I'm seeing
> several guys say that stranded is better but I'm wondering if this is so
> then why don't amp builders use this technique?
>       I'm thinking that stranded conductors by shorting against each other
> negate any advantage they might have at very low frequency and are
actually
> worse at rf. Am I right, wrong, or clear off base?
>
> Thanks
> 73,
> Steve  wd0ct
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
To: <amps@contesting.com>
Version: 6.0.393 / Virus Database: 223 - Release Date: 10/1/2002


<Prev in Thread] Current Thread [Next in Thread>