On my amp the 24MHz LP filter that needs to be removed is on the input to
the amplifier ie before the tubes
Dave
g4fre
Message: 4
From: "Ron Samchuk" <samvideo@escape.ca>
To: <amps@contesting.com>
To: <amps@contesting.com>
Date: Thu, 17 Oct 2002 08:35:59 -0500
Subject: [Amps] Dentron MLA2500B on 10 meters
Hi everyone: This is my first time on 'Amps' reflector. I recently =
purchased a Dentron MLA2500B which seems to be in good condition. At =
present, it does not operate on 10 meters, but it seems by looking = inside
that the components are there wired to the bandswitch. It also = appears
that if I were to remove the stopper on the bandswitch that 10 = meters
could be there. Any comments from someone who has encountered = this
situation. Thanks from Ron VE4SR
--- StripMime Report -- processed MIME parts --- multipart/alternative
text/plain (text body -- kept)
text/html
---
--__--__--
Message: 5
From: "Dudley Hurry" <jhurry@austin.rr.com>
To: "Ron Samchuk" <samvideo@escape.ca>, <amps@contesting.com>
Subject: Re: [Amps] Dentron MLA2500B on 10 meters
To: <amps@contesting.com>
Date: Thu, 17 Oct 2002 10:56:44 -0500
Ron,
Move the stop on the bandswitch and there is also a filter in the output
that will need to be removed.. It's mounted on a small board after the TR
relay...
Thanks and 73's,
Dudley
WA5QPZ
jhurry@austin.rr.com
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
|