Amps
[Top] [All Lists]

Re: [Amps] Solid State Relays

To: "Phil Clements" <philk5pc@tyler.net>
Subject: Re: [Amps] Solid State Relays
From: Bill Turner <wrt@dslextreme.com>
Reply-to: wrt@dslextreme.com
Date: Fri, 26 Mar 2004 19:09:15 -0800
List-post: <mailto:amps@contesting.com>
On Fri, 26 Mar 2004 20:48:01 -0600, Phil Clements wrote:

>hey are smooth, but too fast to be used alone without other
>components on a capacitor input power supply. It takes time to charge
>the filter capacitor(s). I'll bet there is more to the Commander
>between the mains input and the power transformer than just a relay.

_________________________________________________________

You'd lose that bet.  The schematic shows nothing but the SSR's and
fuses between the mains input and the HV transformer.  The HV meter goes
from zero to 3kv in the blink of an eye, just as you'd expect.  No
thumps, no light dimming, nothing but net.

--
73, Bill W6WRT
QSLs via LoTW

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>