Lionel,
That's the rule with this amp. It's a relic from the tube finals days, and
they simply didn't pay much attention to this - you had to tune the exciter
anyway.
If you wan't to improve it, some ideas can be had from my homepage (FL2000B
refit article).
Or you can just leave it as it is and put a tuner between your tranceiver
and the amp.
Good luck.
Vy 73 de OZ1PIF, Peter
********** OZ1PIF **************
email: oz1pif(no-spam-filler)@privat.dk
http://home24.inet.tele.dk/oz1pif/
Ph. +45 4619 3239
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby Sj.
Denmark
***********************************
----- Original Message -----
From: "lionel" <lsjt4@foothills.net>
To: "amps" <amps@contesting.com>
Sent: Thursday, July 01, 2004 4:46 PM
Subject: [Amps] FL2100
A friend of mine has a FL2100 amp, and has it priced at a reasonable price.
The amp has a problem. The SWR on all bands is much too high, between the
radio and the amp. Could someone give me some suggestions on what to look
for. Could it be a tube causing this, or some other component in the imput.
I would have thought the tuned imput would have been the problem, but it
happens on all bands. Has anyone else had any experience with this problem.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|