Amps
[Top] [All Lists]

[Amps] 1KW+ Amplifier Builder's Component Package

To: Amps@contesting.com
Subject: [Amps] 1KW+ Amplifier Builder's Component Package
From: w2cqm@juno.com
Date: Mon, 30 Aug 2004 09:39:42 -0400
List-post: <mailto:amps@contesting.com>
Offering a complete  amplifier  component parts  package collected for a
planned (aborted)  single 3-500 linear  consisting of:
1 amp HV smoothing (reactor)choke, Plate Xmfr 2500VAC/120vac
primary,10mfd@3KV cap (w/mounts), B&W 10-80m 850A tank/bandswitch
assembly (refurbished), Cardwell dual sect. 75/175 pFd  plate tune,
Cardwell 1600pFd ant tune caps. Flange mount 115VAC blower, interlock
switch, RF choke, DPDTon/off switch, 500pfd/10KV blocking cap,2 fuses,
B&W #800 type HV plate choke (teflon), 0-500ma & 5KV meters (w/mult.
resistors), 24VDC HD 3PDT ant changeover relay(w/mini xmfr,diode, cap,
for 24VDC relay PS)  $435 + shipping (from zip 18426)  Ron W2CQM/3 
PS: 3amp HV FW bridge  & NIB RF Parts 3-500 available) 

http://swap.qth.com/adimages/428138.jpg

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] 1KW+ Amplifier Builder's Component Package, w2cqm <=