Yeah, but sometimes it feels good to do something classical. If I wanted to
go real high-tech, I could use a bunch of FET's and run class E for super
efficiency. But I feel "Real Radios Glow in the Dark."
Mike(y)
W3SLK
----- Original Message -----
From: "R.Measures" <r@somis.org>
To: "k7fm" <k7fm@teleport.com>
Cc: <amps@contesting.com>
Sent: Sunday, February 20, 2005 5:42 AM
Subject: Re: [Amps] Modulation Transformer(s)
On Feb 19, 2005, at 5:25 PM, k7fm wrote:
> First, this is an amplifier question - even though the amplifier part
> in
> question is from a class c amplifier rather than a linear amplifier.
>
> One of these days I plan on building a 500 to 600 watt plate modulated
> rig.
> I have all the parts except the modulation transformer. Finding a 300
> watt
> transformer normally involves the expenditure of about $150 or more.
> I am
> considering another option - that of using 2 modulation transformers
> from an
> ART-13 in parallel.
Low-level modulated, linear-amplified AM has noticeably less IMD
products than plate modulated AM. Fuel injection is noticeably better
than carburetion. Mo' older is not always mo' betta.
>
> The normal arrangement in an ART-13 is P-P 811 tubes modulating an 813.
> What I would propose is P-P/parallel 811 tubes modulating push-pull
> 813s. I
> realize that there may be no real advantage to running the 813s in
> push-pull, but I have the parts and it sounds cooler (only for one
> band, so
> bandswitching is not an issue).
>
> I already have the ART-13 transformers. They are beauties. The
> additional
> advantage of the ART-13 transformers is that there is an extra winding,
> which would be used for feedback to the earlier stages to reduce
> distortion.
>
> I have hunted numerous books and never found it discussed. Anyone
> done it
> before. Any concerns? Are resistors needed to match loads?
>
> 73, Colin K7FM
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.783 / Virus Database: 529 - Release Date: 10/25/04
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|