Amps
[Top] [All Lists]

Re: [Amps] FW: RE: Liquid Cooling Systems

To: amps@contesting.com
Subject: Re: [Amps] FW: RE: Liquid Cooling Systems
From: N5bbc@aol.com
Date: Thu, 10 Mar 2005 23:15:34 EST
List-post: <mailto:amps@contesting.com>
 
Well, if we could use a half size radiator and reduce the frontal area of a  
formula racecar by increasing the effectiveness of the cooling system and  you 
need to increase the cooling capabilities of a liquid cooled transmitting  
tube using a similar cooling system the  SAME product would be useful in  both 
applications.In both applications you are trying to increase the heat  transfer 
into and out of a liquid. You don't really  need a  
USE-IN-TRANSMITTING-TUBES-ONLY  label on a  product to use it in a liquid 
cooled tube.. I believe this 
is useful  to the discussion.
 I just use distilled water  in the tubes of our  welders
 73  Ed  N5BBC    Homebrew ,,Grid driven pair  4-1000 tubes  Pole pig /variac 
supply , Collector  of Vintage Race  Cars and Jaguar Motorcars
 
In a message dated 3/10/2005 9:20:04 P.M. Central Standard Time,  
balmemo@sympatico.ca writes:

Where is  the moderator? Don't you have anything else to talk  about?


-----Original Message-----
From:  amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf  Of N5bbc@aol.com
Sent: Thursday, March 10, 2005 10:12 PM
To:  amps@contesting.com
Subject: Re: [Amps] FW: RE: Liquid Cooling  Systems


I can't remember the name of the product, may have  been  called "Water
Wetter" but it is made by the Red Line lubricant  company  for use in race
car cooling systems,using it really made a  difference in heat  transfer in
race car cooling systems. It should  still be available  in a  well stocked
hot rod shop.

In a  message dated 3/10/2005 8:51:43 P.M. Central Standard  Time,
wa6fgi@sbcglobal.net writes:

Fwiw, I  don't know what  temps are being looked at here,  but if the need to
raise  the  boiling point is necessary, for each pound of pressure placed
upon a   closed system, the boiling point of the water is raised by  3
degrees.
Water  as I recall is the best conductor of heat, when  ethylene glycol
(anti-freeze)  is added the temperature absorption of  the liquid is reduced.
All of the  chemist out there, correct me if I  am wrong.
73,
Gary...   wa6fgi





_______________________________________________
Amps  mailing  list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps





_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>