http://www.gigavac.com/products/relays/datasheets/gh1_3_5/index.htm
on4ma
----- Original Message -----
From: "Marc Chicoine" <wc1x@btinternet.com>
To: <amps@contesting.com>
Sent: Wednesday, March 16, 2005 3:50 AM
Subject: [Amps] RJ1H
>
>
>
> Hal,
>
> Thanks for the guidance for the proper use of "sans".
>
> Further to my original question:
>
> RJ1H relays have tungsten contacts used primarily
> in hot switching applications. The contact resistance
> is 30 mOhms and the current rating falls off much above
> 2.5 Mhz. Switching time is a scant 6 ms.
> I can obtain new ones for relatively low price.
> Are they suitable for Amateur Radio use at full legal power levels?
>
>
> Marc
>
>
> > ----- Original Message -----
> > From: "Harold B. Mandel" <ka1xo@juno.com>
> > To: <wc1x@btinternet.com>
> > Sent: Wednesday, March 16, 2005 00:43
> > Subject: Re: [Amps] RJ1H
> >
> >
> >> Dear Marc,
> >>
> >> Jennings RJ-1H?
> >>
> >> I know the generic RJ-1 series is good for one (1) ampere,
> >> reliably, at 28 MHz., (32MHz., as Jennings puts it), and maybe
> >> three (3) amperes at 1.9MHz., but the "H" stumps me.
> >>
> >> I have RJ-1A's and RF-1's, RJ-2's, 3's, even 2B's and an odd 10,
> >> but the H factor needs explaining.
> >>
> >> If you want to put a vacuum set of relays in the '220, an RF-1E,
(SPDT),
> >> is great for the input and a 1A would do great on the output, if that
> >> answers your question. (Why did you use the word "sans?" That means
> >> "without." Did you mean to say "dans," or "within?")
> >>
> >> Hal Mandel
> >> W4HBM
> >>> Are Jennings RJ1H relays suitable for R.F. applications? (sans
> >>> SB-220)
> >>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.7.3 - Release Date: 15/03/2005
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.3 - Release Date: 15/03/2005
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|