Sounds to me as if you have a U.S. Towers tower. They have plants in
Visalia, CA and another in Kansas.
73,
Gary...wa6fgi
w2cqm@juno.com wrote:
> Could use some assistance in identifying a recently purchased 40' tubular
> free standing crank up tower. This is two section with one pipe nested
> inside the other. There's a separate 6"x6"x 5' base with a 4 bolt flange.
> Two winches. One cranks up and the other tilts over the tower. The
> rotator is at the base and the entire and two section tower rotates while
> being held in place with two part yoke type collars attached to the
> fixed base. Could use the manufacturer's name so I can inquire about the
> concrete base parameters. Any help would be appreciated. The tower is
> vintage and needs winches, and shaft pulley refurbishing. Ron W2CQM/3
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|