John,
Asside from the physical size of the innards, I always thought the 3-400z had
the same base as the 3-500z? If so, about the only thing will change is the
increased pate current if you run them at their higher output and that will
change the plate impedance so a tweaking of the tank coil may be necessary. If
your going to run them at the same power out as the 400's then nothing should
change theoretically. You would most likely have to cut the drive back some
though to achieve this. If I'm off here let me know and will be glad to help
you on converting it.
Best,
Will
*********** REPLY SEPARATOR ***********
On 10/1/05 at 12:29 PM John T. M. Lyles wrote:
>We have no more good 3-400Z's, a box of duds left. I have 6 sockets
>for these tubes that must operate 24/7 all year, so cannot afford to
>wait for someone to start producing 3-400z again.....
>
>Ciao
>John
>K5PRO
>
>>On Sep 29, 2005, at 12:26 PM, Peter Chadwick wrote:
>>
>>>Rich said
>>>
>>>>In pulse service. 3-500Zs offer virtually no advantage over 3-400Zs.
>>>
>>>Electrically, this almost certainly true. But how about price and
>>>availability?
>>
>>The issue is about changing out good 3-400Zs for 3-500Zs.
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|