Have a few filament transformers that may be of some interest here.
1. Transformer for single or two 3CX800A7's Has dual secondary windings.
Use one winding for one tube or both for two tubes. 120v
primary..............$40.00
2. Transformer for GI-7B for single or two tubes 120v
primary..............$40.00
3. Transformer for single 3-500, 3-400 or 4-400 120v
primary...............$30.00
4. Transformer for single 8877 dual primary
120/240............................$45.00
5. Transformer for pair of 8877 with filaments run in series small
footprint................$50.00
6, Filament transformer for Russian GS-35B 120v
primary................................$40.00
PLATE transformers
1. Pole Pig......I do not recall the secondary voltage off hand, but I had
this working with a power supply I built using a Variac on the primary. At
full 240 in, it would make 6000 volts using a FWB rectifier. Current.......?
ALot! .......Very Very Heavy pick up only....$175.00
2.Pole Pig.........This one has about 1950 vac secondary, using a doubler
you can get lots of HV with lots of current.......Very Very heavy.........pick
up only................$150.00
Please e-mail me if anything strikes the resonant chord........73 Lou
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|