Amps Mailing List (date)

Amps Mailing List (date)

[Thread Index] [Top] [All Lists]

September 30, 2006

Re: [Amps] Boycott New Chinese linear Amplifier, Administrator, 21:10
Re: [Amps] Boycott New Chinese linear Amplifier, Tom W8JI, 20:48
Re: [Amps] New Chinese linear Amplifier, Bert, 20:41
Re: [Amps] New Chinese linear Amplifier, Jim Brown, 20:17
Re: [Amps] Boycott New Chinese linear Amplifier, Hsu, 20:14
Re: [Amps] Boycott New Chinese linear Amplifier, Tom W8JI, 20:04
[Amps] Boycott New Chinese linear Amplifier, Fern Rivard, 20:03
[Amps] Fixed Padder Capacitors --- POSTSCRIPT, Ed Swynar, 19:55
Re: [Amps] Bad Tubes, PA3DUV, 00:54
Re: [Amps] Bad tubes from Ebay, PA3DUV, 00:54
Re: [Amps] New Chinese linear Amplifier, Tom W8JI, 00:06

September 29, 2006

Re: [Amps] shipping damage, Robert B. Bonner, 23:39
Re: [Amps] shipping damage, Gudguyham, 23:30
Re: [Amps] shipping damage, Robert B. Bonner, 22:50
Re: [Amps] 3cpx800a7 or similar tube storage, Tom W8JI, 22:46
Re: [Amps] New Chinese linear Amplifier, Hsu, 22:45
Re: [Amps] 3cpx800a7 or similar tube storage, Dan Hearn, 21:44
[Amps] 3cpx800a7 or similar tube storage, Rob @ Peg Pohorence, 21:24
Re: [Amps] shipping damage, Tom W8JI, 18:56
[Amps] shipping damage, carl s., 17:15
Re: [Amps] Bad Tubes, Tom W8JI, 15:43
Re: [Amps] Bad Tubes, Mike McCarthy, W1NR, 13:54
[Amps] Bad Tubes, Dennis W0JX, 13:25
Re: [Amps] New Chinese linear Amplifier, kenw2dtc, 12:57
Re: [Amps] New Chinese linear Amplifier, Phil Clements, 12:52
[Amps] RE : New Chinese linear Amplifier, hermans, 12:51
Re: [Amps] Newbie Question II, Gudguyham, 12:48
[Amps] RE : Bad tubes and bad shipping, hermans, 12:46
Re: [Amps] Newbie Question II, W7RY, 12:45
[Amps] RE : New Chinese linear Amplifier, hermans, 12:37
[Amps] Bad tubes and bad shipping, Larry, 11:20
[Amps] shipping damage, Harold Mandel, 09:23
Re: [Amps] Bad tubes from Ebay (USPS), Rich & DJ, 09:01
Re: [Amps] New Chinese linear Amplifier, Edward Gable, 08:11
Re: [Amps] New Chinese linear Amplifier, Martin Sole, 07:08
[Amps] New Chinese linear Amplifier, Hsu, 06:40
[Amps] Newbie Question SB-200, edk0kl, 04:49
Re: [Amps] Newbie Question II, Gudguyham, 01:22
[Amps] Newbie Question II, Bob Green, 01:15

September 28, 2006

Re: [Amps] Bad tubes from Ebay, Robert B. Bonner, 21:37
[Amps] Sockets needed, John Vickers, 18:33
Re: [Amps] Bad tubes from Ebay, RICHARD GEORGE, 17:40
Re: [Amps] Bad tubes from Ebay, Steve Thompson, 17:36
Re: [Amps] Bad tubes from Ebay, Peter Voelpel, 17:30
Re: [Amps] Bad tubes from Ebay, John Vickers, 17:23
Re: [Amps] Bad tubes from Ebay, Robert B. Bonner, 16:14
[Amps] Bad tubes from Ebay, Larry, 14:44
Re: [Amps] off topic but here goes, John E. Cleeve, 11:11
Re: [Amps] Newbie question, W7RY, 10:49
[Amps] Fixed Padding Capacitors at Plate Tuning --- EPILOGUE, Ed Swynar, 09:14
[Amps] Newbie question, Bob Green, 07:29
Re: [Amps] off topic but here goes, Steve Thompson, 07:08
Re: [Amps] off topic but here goes, Gudguyham, 06:54
Re: [Amps] off topic but here goes, Steve Thompson, 03:01
Re: [Amps] off topic but here goes, Marc Wullaert ON4MA, 01:33

September 27, 2006

Re: [Amps] Need Some Experienced Feedback Here..., Robert B. Bonner, 23:36
[Amps] off topic but here goes, Gudguyham, 22:57
[Amps] SELL: complete Pi-network for pair 3-500, Gudguyham, 22:39
Re: [Amps] Need Some Experienced Feedback Here..., Robert B. Bonner, 19:52
[Amps] SELL: filament transformers/plate, Gudguyham, 18:47
Re: [Amps] HV Turn On Delay, Phil Clements, 14:23
Re: [Amps] HV Turn On Delay, john . brewer, 13:32
Re: [Amps] HV Turn On Delay, George Watson, 11:38
Re: [Amps] HV Turn On Delay, Tom W8JI, 11:34
Re: [Amps] Need Some Experienced Feedback Here..., Vic K2VCO, 11:30
Re: [Amps] HV Turn On Delay, Vic K2VCO, 11:17
Re: [Amps] feedback for Eddy, Roy Koeppe, 10:07
[Amps] Need Some Experienced Feedback Here..., Ed Swynar, 07:30
Re: [Amps] HV Turn On Delay, Tom W8JI, 04:42
Re: [Amps] HV Turn On Delay, Steve Thompson, 03:13
Re: [Amps] HV Turn On Delay, Phil Clements, 01:07

September 26, 2006

[Amps] HV Turn On Delay, Mike, 23:34
Re: [Amps] *** SPAM *** Re: Titan 425 Reflected Power, Tom W8JI, 06:00
Re: [Amps] *** SPAM *** Re: Titan 425 Reflected Power, Peter Chadwick, 04:54

September 25, 2006

Re: [Amps] Titan 425 Reflected Power, Tom W8JI, 17:03
Re: [Amps] Titan 425 Reflected Power, bob finger, 12:47
Re: [Amps] Titan 425 Reflected Power, k7rdx, 12:44
Re: [Amps] Titan 425 Reflected Power, Jim Brown, 12:29
Re: [Amps] Titan 425 Reflected Power, Gary Schafer, 11:01
Re: [Amps] Titan 425 Reflected Power, Michael Tope, 10:23
[Amps] SELL: Heath SB201/SB1000 6m Amps, w2cqm@juno.com, 09:10
Re: [Amps] Titan 425 Reflected Power, Tom W8JI, 05:42
Re: [Amps] Titan 425 Reflected Power, Tom W8JI, 05:39
Re: [Amps] Titan 425 Reflected Power, Will Matney, 03:13
Re: [Amps] Titan 425 Reflected Power, Peter Chadwick, 03:02
Re: [Amps] Titan 425 Reflected Power, Michael Tope, 02:53
Re: [Amps] Titan 425 Reflected Power, Gudguyham, 02:17

September 24, 2006

[Amps] Large band switch for sale, Hsu, 22:25
Re: [Amps] Titan 425 Reflected Power, Tom W8JI, 21:13
Re: [Amps] Titan 425 Reflected Power, Michael Tope, 21:12
[Amps] SELL: Discrete Amplifier Parts, w2cqm@juno.com, 19:02
Re: [Amps] Titan 425 Reflected Power, Jim Brown, 18:29
Re: [Amps] Titan 425 Reflected Power, Tom W8JI, 18:23
Re: [Amps] Titan 425 Reflected Power, Mike Schatzberg, 17:56
Re: [Amps] Titan 425 Reflected Power, Robert B. Bonner, 17:40
[Amps] Titan 425 Reflected Power, Jim Brown, 17:03
[Amps] 400 cycle Variacs, Larry Carman, 13:48
Re: [Amps] Bird wattmeters...., Paul Christensen, 07:47
[Amps] Bird wattmeters...., ec1cwg, 04:05

September 22, 2006

Re: [Amps] Fw: Step Start on a 3KA Amp, Tom W8JI, 22:04
Re: [Amps] Fw: Step Start on a 3KA Amp, jeff millar, 17:16
[Amps] FS: SK-410, StephenTetorka, 15:25
[Amps] Change of E Mail Address, Bob Maser, 12:28
Re: [Amps] Change of E Mail Address, Bob Maser, 10:40
Re: [Amps] Change of E Mail Address, Joe Subich, W4TV, 10:38
[Amps] Change of E Mail Address, Bob Maser, 09:33
Re: [Amps] HV stabilisation in a triode amp, Robert B. Bonner, 08:53
Re: [Amps] TE Systems, Robert B. Bonner, 08:42
[Amps] HV stabilisation in a triode amp, Angel Vilaseca, 06:48
[Amps] TE Systems, John Lemay, 04:17

September 21, 2006

Re: [Amps] Fw: Step Start on a 3KA Amp, Tom W8JI, 20:34
[Amps] Hipot and other equipment for sale, Will Matney, 20:30
Re: [Amps] US source for TRIODE board, Peter Voelpel, 19:22
Re: [Amps] US source for TRIODE board, Paul Whatton, 19:05
Re: [Amps] Fw: Step Start on a 3KA Amp, jeff millar, 18:25
Re: [Amps] US source for TRIODE board, Ian White GM3SEK, 18:04
Re: [Amps] amplifier design, Robert B. Bonner, 17:45
Re: [Amps] amplifier design, Robert B. Bonner, 16:55
Re: [Amps] US source for TRIODE board, W7RY, 15:00
[Amps] US source for TRIODE board, john . brewer, 14:17
Re: [Amps] amplifier design, Scott & Laura Goldensoph, 13:03
Re: [Amps] amplifier design, Mike McCarthy, W1NR, 12:38
[Amps] leaking tubes TSPA, John T. M. Lyles, 12:36
Re: [Amps] amplifier design, wc6w@juno.com, 12:32
Re: [Amps] Fw: Step Start on a 3KA Amp, PA3DUV, 11:33
Re: [Amps] Please unsubscribe me from your list., Theo Bellamy, 09:33
Re: [Amps] Price Help, Tom W8JI, 09:26
Re: [Amps] amplifier design, Tom W8JI, 09:12
Re: [Amps] Fw: Step Start on a 3KA Amp, Tom W8JI, 09:08
[Amps] K2XX's e-mail, Hsu, 08:12
Re: [Amps] Step Start on a 3KA Amp, PA3DUV, 07:53
Re: [Amps] Fw: Step Start on a 3KA Amp, PA3DUV, 07:34
[Amps] Fw: Step Start on a 3KA Amp, PA3DUV, 03:54

September 20, 2006

[Amps] Look for SK2216, stefano, 22:22
Re: [Amps] amplifier design, RICHARD GEORGE, 19:58
Re: [Amps] amplifier design, Scott & Laura Goldensoph, 19:01
Re: [Amps] Price Help, k7rdx, 18:31
Re: [Amps] Price Help, Gudguyham, 16:53
Re: [Amps] [-] Re: Step Start on a 3KA Amp, Ian White GM3SEK, 16:32
[Amps] Please unsubscribe me from your list., Bolbach, Timothy, 16:00
[Amps] Price Help, Dan Hearn, 15:39
Re: [Amps] [-] Re: Step Start on a 3KA Amp, Paul Playford, 13:07
[Amps] Price Help, Dan Hearn, 10:52
Re: [Amps] Step Start on a 3KA Amp, Ian White GM3SEK, 05:35
Re: [Amps] New Amps Group, Alek Petkovic, 04:34
Re: [Amps] Bird 43 meter, Steve Thompson, 02:36
Re: [Amps] amplifier design, Hsu, 00:46

September 19, 2006

[Amps] amplifier design, Scott & Laura Goldensoph, 23:53
[Amps] 813 TUBES FOR SALE, OTAKEBI, 23:40
[Amps] MLA-2500 Multimeter Needed, Bob Maser, 23:14
Re: [Amps] New Amps Group, John Vickers, 22:46
Re: [Amps] Bird 43 meter, Larry, 22:05
[Amps] New Amps Group, Mike Sawyer, 21:34
Re: [Amps] Step Start on a 3KA Amp, Will Matney, 19:09
Re: [Amps] Step Start on a 3KA Amp, Will Matney, 19:00
Re: [Amps] Step Start on a 3KA Amp, Larry Carman, 18:45
Re: [Amps] Gerritsen Sentencing, Administrator, 18:44
Re: [Amps] Gerritsen, Robert B. Bonner, 17:55
[Amps] Gerritsen, Harold Mandel, 17:38
Re: [Amps] Gerritsen Sentencing, Mike Sawyer, 17:27
[Amps] Amp parts, Dan Hearn, 16:49
Re: [Amps] Step Start on a 3KA Amp, Harold Mandel, 16:05
Re: [Amps] Step Start on a 3KA Amp, Bob Maser, 16:01
Re: [Amps] Step Start on a 3KA Amp, Phil Clements, 15:06
Re: [Amps] Step Start on a 3KA Amp, Ian White GM3SEK, 14:50
Re: [Amps] Step Start on a 3KA Amp, Phil Clements, 13:50
[Amps] Gerritsen Sentencing, Gary Smith, 13:42
Re: [Amps] Bird 43 meter, Larry Carman, 09:59
Re: [Amps] Bird 43 meter, Steve Thompson, 09:25
Re: [Amps] Bird 43 meter, Hsu, 09:24
Re: [Amps] Step Start on a 3KA Amp, Will Matney, 01:28
[Amps] Bird 43 meter, Larry, 01:28
[Amps] A little ot but..., Gary Smith, 01:28
[Amps] Tom Hix (Tom's Tubes), BJ VOUTE, 01:27
Re: [Amps] Step Start on a 3KA Amp, Bob Maser, 01:27

September 18, 2006

[Amps] IRC, Steve and Judy, 09:22
Re: [Amps] Step Start on a 3KA Amp, Ian White GM3SEK, 09:22
Re: [Amps] Step Start on a 3KA Amp, Bob Maser, 09:22
Re: [Amps] Step Start on a 3KA Amp, Gudguyham, 09:22
Re: [Amps] Step Start on a 3KA Amp, Vic K2VCO, 09:22

September 17, 2006

[Amps] Step Start on a 3KA Amp, Bob Maser, 23:24
[Amps] SELL: 15VCT @ 22amp Filament Xmfr, w2cqm@juno.com, 23:24
Re: [Amps] [-] Re: Kilovac HC-2 Mounting Nut, W8AEF, 02:02
[Amps] gu-84b cathode driven, bubba willis, 02:02

September 16, 2006

Re: [Amps] Kilovac HC-2 Mounting Nut, Karl-Arne Markström, 02:35
Re: [Amps] Kilovac HC-2 Mounting Nut, Mike Schatzberg, 02:35
Re: [Amps] Kilovac HC-2 Mounting Nut, Steve Thompson, 02:34
Re: [Amps] Kilovac HC-2 Mounting Nut, Peter Chadwick, 02:34

September 15, 2006

[Amps] Kilovac HC-2 Mounting Nut, Mike, 00:35
Re: [Amps] Bliss Motarized High-Power Tuner, Bob Maser, 00:35

September 14, 2006

[Amps] Bliss Motarized High-Power Tuner, Paul Christensen, 15:25

September 13, 2006

[Amps] Al-80B For Sale, Tom Martin, 23:52
[Amps] HV Discharge Safety Switch, K6TFZ, 23:52

September 12, 2006

Re: [Amps] Technical specification question, possibly OT !, sm0aom, 23:24
[Amps] Want to buy Two 3CPX800A7 TUBES, Rob @ Peg Pohorence, 23:21
[Amps] RJ1C Relay Needed, Bob Maser, 23:20
[Amps] MLA2500 Multimeter Needed, Bob Maser, 23:20
[Amps] SELL: HV PS CAPACITORS, Gudguyham, 23:19
Re: [Amps] Technical specification question, possibly OT !, Peter Chadwick, 23:19
Re: [Amps] 572B bias FL2100, Peter Chadwick, 23:19
Re: [Amps] Technical specification question, possibly OT !, Peter Chadwick, 23:19

September 11, 2006

[Amps] Parasitic Suppressors for GI-7B., robert briggs, 20:03
Re: [Amps] Technical specification question, possibly OT !, Peter Chadwick, 20:02
Re: [Amps] 572B bias FL2100, Tom W8JI, 20:02
Re: [Amps] Parasitic suppressors on GI-7B., Peter Chadwick, 20:02
Re: [Amps] Technical specification question, possibly OT !, Karl-Arne Markström, 20:00
[Amps] Technical specification question, possibly OT !, Martin Sole, 11:11
Re: [Amps] Parasitic suppressors on GI-7B., Ian White GM3SEK, 11:11
Re: [Amps] amp tubes, Tom W8JI, 01:49
[Amps] TL-922 Cooling Thanks, Alek Petkovic, 01:49

September 10, 2006

[Amps] Parasitic suppressors, robert briggs, 18:39
Re: [Amps] amp tubes, Will Matney, 18:39
Re: [Amps] TL-922 Cooling, Don Kessler, 18:39
Re: [Amps] Parasitic suppressors on GI-7B., Peter Chadwick, 18:39
Re: [Amps] amp tubes, Peter Chadwick, 18:38
Re: [Amps] 572B bias, Ian White GM3SEK, 18:38
Re: [Amps] Vacuum variable testing?, Ian White GM3SEK, 18:38
Re: [Amps] TL-922 Cooling, W7RY, 18:38
Re: [Amps] TL-922 Cooling, Dan Hearn, 18:38
Re: [Amps] amp tubes, Gudguyham, 09:39
Re: [Amps] amp tubes, Gudguyham, 09:38
[Amps] 572B bias, carl s., 09:36
Re: [Amps] Vacuum variable testing?, Peter Chadwick, 09:36
Re: [Amps] amp tubes, Alek Petkovic, 09:36
[Amps] Chinese 3-500 Tubes, Alek Petkovic, 09:36
[Amps] TL-922 Cooling, Alek Petkovic, 09:35
[Amps] Parasitic suppressors on GI-7B., robert briggs, 09:35

September 09, 2006

Re: [Amps] Amps Digest, Vol 45, Issue 21, Edwin Karl, 22:47
Re: [Amps] Tektronix S-30, Will Matney, 22:46
[Amps] calibrate meter, bubba willis, 20:23
Re: [Amps] NOS 4CX1000A test and reconditioning, Joe Subich, W4TV, 20:22
[Amps] Tektronix S-30, Will Matney, 20:22
Re: [Amps] amp tubes, Tom W8JI, 20:22
[Amps] Vacuum variable testing?, StephenTetorka, 20:22
Re: [Amps] amp tubes, Mike Baker, 09:02

September 08, 2006

Re: [Amps] NOS 4CX1000A test and reconditioning, Paul Christensen, 23:06
Re: [Amps] NOS 4CX1000A test and reconditioning, Robert B. Bonner, 23:05
Re: [Amps] NOS 4CX1000A test and reconditioning, Robert B. Bonner, 23:05
Re: [Amps] NOS 4CX1000A test and reconditioning, Joe Subich, W4TV, 22:02
[Amps] Ferromagnetic Core Design & Application Handbook, Will Matney, 22:00
Re: [Amps] NOS 4CX1000A test and reconditioning, Paul Christensen, 21:23
Re: [Amps] NOS 4CX1000A test and reconditioning, Tom W8JI, 21:21
[Amps] amp tubes, carl s., 21:21
Re: [Amps] NOS 4CX1000A test and reconditioning, Mike Manship, 19:05
Re: [Amps] [1000mp] 1000MP Power Supplies, Harold Mandel, 19:04
Re: [Amps] NOS 4CX1000A test and reconditioning, Dan Hearn, 12:25
Re: [Amps] Rich Measures, Administrator, 01:56
Re: [Amps] Rich Measures, Gary McAdams, 00:36
[Amps] Rich Measures, RICHARD GEORGE, 00:22

September 07, 2006

[Amps] SELL:Japan Radio Tank Circuit Assembly, w2cqm@juno.com, 21:24
Re: [Amps] AL-80B Trouble, W5CUL, 20:45

September 06, 2006

Re: [Amps] Henry 3K-A Step Start Resitor Cone, m.ford, 22:15
Re: [Amps] Henry 3K-A Step Start Resitor Cone, Jennings, 21:35
[Amps] 3K-A Step Start Resistor Cone, Bob Maser, 18:14
Re: [Amps] SPAM, Tom W8JI, 18:02
[Amps] Bad GS35, Larry, 17:59
Re: [Amps] SPAM, Keith Dutson, 17:17
Re: [Amps] SPAM, Will Matney, 17:10
Re: [Amps] SPAM, William Stehl, 17:06
[Amps] SPAM, Peter Chadwick, 17:03
[Amps] FW: Henry 3K-A Step Start Resitor Cone, Larry Carman, 15:53
Re: [Amps] Henry 3K-A Step Start Resitor Cone, Edgar Brown, N6OU, 12:01
Re: [Amps] Henry 3K-A Step Start Resitor Cone, Phil Clements, 11:21
Re: [Amps] Henry 3K-A Step Start Resitor Cone, W7RY, 11:13
Re: [Amps] Henry 3K-A Step Start Resitor Cone, Robert B. Bonner, 11:05
Re: [Amps] Henry 3K-A Step Start Resitor Cone, W7RY, 10:59
Re: [Amps] Henry 3K-A Step Start Resitor Cone, Steve Thompson, 10:00
[Amps] FW: Henry 3K-A Step Start Resitor Cone, Larry Carman, 09:46
Re: [Amps] Inexpensive variable air cap for amps, Hsu, 09:14
Re: [Amps] remove, Alek Petkovic, 09:07
[Amps] remove, Mark, 09:01
Re: [Amps] NOS 4CX1000A test and reconditioning, Hsu, 08:13
[Amps] NOS 4CX1000A test and reconditioning, Hsu, 08:07
Re: [Amps] Henry 3K-A Step Start Resitor Cone, K8MLM, 07:32

September 05, 2006

Re: [Amps] Henry 3K-A Step Start Resitor Cone, RCM, 22:38
[Amps] Henry 3K-A Step Start Resitor Cone, Bob Maser, 21:42
[Amps] DB9 RF filter, mike kendall, 21:12
Re: [Amps] Inexpensive variable air cap for amps, Hsu, 20:19
[Amps] RFPP53 datasheet, Hsu, 20:11
Re: [Amps] History of AMPS, Dan_K9ZF, 17:33
[Amps] EB104 600 watt amp, zd, 17:23
[Amps] Problems with HLA300, DH5HV, 17:13
Re: [Amps] Cooling for GI-7B triodes., Mike Bondarev, 14:30
Re: [Amps] Inexpensive variable air cap for amps, Peter Chadwick, 14:23
Re: [Amps] Inexpensive variable air cap for amps, Robert B. Bonner, 12:36
[Amps] EB104 600 watt amp, Duane B, 12:33
[Amps] Inexpensive variable air cap for amps, Hsu, 12:03
Re: [Amps] bandswitch wiper connection, Tom W8JI, 11:42
[Amps] bandswitch wiper connection, Scott Townley, 11:12
Re: [Amps] Parasitics & Filament Sag, Michael Tope, 10:21
Re: [Amps] History of AMPS, Martin AA6E, 09:32
Re: [Amps] Need Tokyo High Power Amp Information, Atsushi Nishio, 08:40
Re: [Amps] Parasitics & Filament Sag, Michael Tope, 08:36
Re: [Amps] Cooling for GI-7B triodes., Mike(W5UC) & Kathy(K5MWH), 08:34
Re: [Amps] Cooling for GI-7B triodes., Tony King - W4ZT, 08:10
Re: [Amps] ÂParasitics & Filament Sag, Tom W8JI, 05:00
[Amps] ÂParasitics & Filament Sag, Peter Chadwick, 03:47
Re: [Amps] Cooling for GI-7B triodes., Steve Thompson, 03:15
Re: [Amps] Murphy in my shack, zl1aih, 02:53
[Amps] History of AMPS, R L Measures, 01:34
Re: [Amps] Parasitics & Filament Sag, Michael Tope, 01:05
Re: [Amps] Need Tokyo High Power Amp Information, Dudley Hurry, 00:06

September 04, 2006

[Amps] Cooling for GI-7B triodes., robert briggs, 23:12
Re: [Amps] Parasitics & Filament Sag, Jim Forsyth, 21:03
Re: [Amps] Parasitics & Filament Sag, Tom W8JI, 19:13
Re: [Amps] *** SPAM *** Re: Parasitics & Filament Sag, Mike Sawyer, 18:17
Re: [Amps] *** SPAM *** Re: Parasitics & Filament Sag, Peter Chadwick, 18:00
Re: [Amps] *** SPAM *** Re: Parasitics & Filament Sag, Peter Chadwick, 17:51
Re: [Amps] Parasitics & Filament Sag, Michael Tope, 17:03
Re: [Amps] Parasitics & Filament Sag, Michael Tope, 16:54
Re: [Amps] Parasitics & Filament Sag, Michael Tope, 14:10
Re: [Amps] Parasitics & Filament Sag, Martin AA6E, 13:40
Re: [Amps] Parasitics & Filament Sag, Phil Clements, 13:35
Re: [Amps] Parasitics & Filament Sag, Jim Forsyth, 13:33
Re: [Amps] Parasitics & Filament Sag, Karl-Arne MarkstrÃm, 13:25
Re: [Amps] Parasitics & Filament Sag, Jim Forsyth, 12:19
Re: [Amps] Parasitics & Filament Sag, Jim Forsyth, 11:15
Re: [Amps] Parasitics & Filament Sag, Will Matney, 10:41
Re: [Amps] Parasitics & Filament Sag, Jim Forsyth, 10:41
Re: [Amps] Parasitics & Filament Sag, Mike Sawyer, 09:52
Re: [Amps] Parasitics & Filament Sag, Peter Chadwick, 09:22
Re: [Amps] Parasitics & Filament Sag, Mike Sawyer, 08:46
Re: [Amps] Parasitics & Filament Sag, Peter Chadwick, 05:26
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 03:25
Re: [Amps] Parasitics & Filament Sag, R L Measures, 01:21
Re: [Amps] Parasitics & Filament Sag, R L Measures, 01:21

September 03, 2006

Re: [Amps] Parasitics & Filament Sag, Ian White GM3SEK, 18:54
Re: [Amps] EIMAC vs. SED 3CPX800A7, Merit Arnold, 14:28
[Amps] Fw: I need coil clips, kenw2dtc, 10:28
Re: [Amps] I need coil clips, Bob Sullivan, 09:51
Re: [Amps] Parasitics & Filament Sag, Peter Chadwick, 09:39
Re: [Amps] I need coil clips, Mike Sawyer, 08:53
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 08:52
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 08:18
Re: [Amps] Parasitics & Filament Sag, Ian White GM3SEK, 03:40
[Amps] I need coil clips, kenw2dtc, 03:01
Re: [Amps] Parasitics & Filament Sag, Peter Chadwick, 02:57
Re: [Amps] Pi-L values, R L Measures, 01:01
Re: [Amps] Parasitics & Filament Sag, R L Measures, 01:00

September 02, 2006

[Amps] Astron and Kenwood TL922-A Replacement Case Parts, Robert B. Bonner, 22:04
Re: [Amps] Pi-L values, Tom W8JI, 20:45
Re: [Amps] Pi-L values, zl1aih, 18:13
[Amps] Kenwood TL922-A Replacement Case Parts, Mark Wheeles, 16:15
Re: [Amps] Pi-L values, Tom W8JI, 15:19
[Amps] Henry 3K-A Pics, Bob Maser, 14:15
Re: [Amps] Astrons catching on Fire, Vic K2VCO, 13:55
Re: [Amps] Pi-L values, Larry Carman, 13:47
Re: [Amps] Astrons catching on Fire, m.ford, 12:36
Re: [Amps] Astrons catching on Fire, wc6w@juno.com, 12:22
Re: [Amps] Astrons catching on Fire, W7RY, 12:15
Re: [Amps] Astrons catching on Fire, m.ford, 11:44
[Amps] Astrons catching on Fire, Harold Mandel, 10:59
Re: [Amps] pwr supplies, m.ford, 10:48
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 10:26
Re: [Amps] pwr supplies, Harold Mandel, 09:57
Re: [Amps] Pi-L values, Bob Maser, 09:37
Re: [Amps] Pi-L values, Bob Maser, 09:32
Re: [Amps] Pi-L values, Tom W8JI, 08:45
Re: [Amps] Pi-L values, zl1aih, 05:14
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 02:49

September 01, 2006

Re: [Amps] Parasitics & Filament Sag, R L Measures, 23:39
Re: [Amps] Need Japan Radio Plate Transformer Info, Will Matney, 21:30
Re: [Amps] Need Japan Radio Plate Transformer Info, Will Matney, 21:25
Re: [Amps] Need Japan Radio Plate Transformer Info, Will Matney, 21:23
Re: [Amps] pwr supplies, W7RY, 17:27
[Amps] pwr supplies, carl s., 17:02
Re: [Amps] Need Japan Radio Plate Transformer Info, Gary Smith, 13:40
Re: [Amps] Need Japan Radio Plate Transformer Info, Robert B. Bonner, 12:45
Re: [Amps] Problem: Ameritron 811H, Vic K2VCO, 11:25
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 10:01
[Amps] Problem: Ameritron 811H, Ari Vepsalainen, 09:41
Re: [Amps] Need Japan Radio Plate Transformer Info, Phil Clements, 09:32
Re: [Amps] Parasitics & Filament Sag, R L Measures, 09:23
Re: [Amps] Parasitics & Filament Sag, R L Measures, 09:22
Re: [Amps] email to Hsu, Hsu, 08:33
Re: [Amps] email to Hsu, Alek Petkovic, 07:57
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 07:34
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 07:32
[Amps] email to Hsu, Lon W. Cottingham, 07:19
[Amps] Japan Radio Amp plate transformer update, w2cqm@juno.com, 07:13
Re: [Amps] Parasitics & Filament Sag, Peter Chadwick, 06:37
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 06:22
Re: [Amps] Need Japan Radio Plate Transformer Info, Martin Sole, 05:39
Re: [Amps] Need Japan Radio Plate Transformer Info, Peter Chadwick, 05:00
[Amps] 3-500 FS, Hsu, 04:54
Re: [Amps] Need Japan Radio Plate Transformer Info, Tom W8JI, 04:51
[Amps] metal cermic tube FS, Hsu, 04:38
Re: [Amps] Parasitics & Filament Sag, R L Measures, 00:55