Re: [Amps] Newbie Question II

[Gudguyham@aol.com]

In a message dated 9/29/2006 1:15:24 A.M. Eastern Standard Time,  
w6bbl@charter.net writes:

and grid  current pegs negatively


Usually negative pegging of a grid meter indicates an open grid shunt  
resistor.  Locate your grid shunt resistor and check it out  It could  be 
intermittent so check it closely even under the board area for a slight  crack. 
73 Lou
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps