I have to ask. Why would you want to design an amp from scratch for your first
attempt? It May be better to build something first, from a known schematic and
design. I think you will find that getting an amp to work properly from a known
design is a challenge in it self, let alone designing and building for the
first attempt. Also getting one working can kill you! Understand the dangers
of high voltage.
----- Original Message -----
From: Scott & Laura Goldensoph<mailto:goldy98@mchsi.com>
To: amps@contesting.com<mailto:amps@contesting.com>
Sent: Wednesday, September 20, 2006 4:01 PM
Subject: Re: [Amps] amplifier design
I have looked at these and they still leave me scratching my head. One
example: How do you determine the diameter of the tank circuit? How do you
figure the optimum load resistance? I've gone through the formulas in the 2005
ARRL handbook and it does explain it some but not from a beginners standpoint.
_______________________________________________
Amps mailing list
Amps@contesting.com<mailto:Amps@contesting.com>
http://lists.contesting.com/mailman/listinfo/amps<http://lists.contestingcom/mailman/listinfo/amps>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|