Re: [Amps] Kilovac HC-2 Mounting Nut

[Peter Chadwick <g3rzp@g3rzp.wanadoo.co.uk>]

Mike said:
>The threads on the 
M14x1.5 nuts I could find were too coarse for the fine threads on the 
relay. The spec sheet identifies the threads as M14x1.5-6g. Not 
sure what the "-6g" means; something to do with "fine" thread?<

There's 14 x1.25 mm metric 'extra fine', which it might be.
73
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps