On Sep 2, 2006, at 2:14 AM, zl1aih@ihug.co.nz wrote:
> Hi All,
> I'm working on a Sunair GSL-1900A amplifier - 4CX1500B, passive
> grid AB1, 1.6 to 30mHz auto-tune. Anode 2500v at 0.650 amps,
> requires 40 watts drive for 1kW out.
> Getting close to a kW into a dummy load (a Heathkit 'Cantenna', so
> the tests are brief)
As they should be with a 50W rated resistor.
cheers, Ken
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
R L MEASURES, AG6K. 805-386-3734
r@somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|