Amps
[Top] [All Lists]

[Amps] QST Jan 06 (Off topic)

To: <amps@contesting.com>
Subject: [Amps] QST Jan 06 (Off topic)
From: Robert Chudek - KØRC <k0rc@pclink.com>
Reply-to: Robert Chudek - KØRC <k0rc@pclink.com>
Date: Mon, 18 Dec 2006 18:12:53 -0600
List-post: <mailto:amps@contesting.com>
Hello Doug,

Yup, your question is off topic for this group, but I hope the moderator will 
tolerate a few replies to your question.

When I read your question and look at your callsign & QRZ listing, I speculate 
you fall outside the "very seasoned 'professional' amateur operator" who 
populate this forum!  :-)

I strongly encourage you to try your hand at building that antenna, or any 
antenna, for that matter. Whether the result is a stunning success or hardly 
outperforms a standard dipole won't be as important as what you will learn 
along the way! Fabricating an antenna is similar to building an amplifier 
because it combines mechanics/fabrication, electronics/RF theory, and of course 
a bunch of magic!

You may want to join the TowerTalk reflector because that groups focus is 
primarily tower and support structures, but they also get into antenna 
discussions from time to time. Oh, and of course, how to determine "true 
north", bird deterrents such as "plastic owls", and how to prepare PL-259's and 
seal them properly. Fun stuff!

73 de Bob - KØRC in MN

------------------------------

Message: 9
Date: Mon, 18 Dec 2006 16:15:31 -0500
From: Doug <dcoffman@iquest.net>
Subject: [Amps] QST Jan 06 (Off topic)
To: "" <amps@contesting.com>
Message-ID: <1166476531.458704f35c8ca@webmail.iquest.net>
Content-Type: text/plain; charset=ISO-8859-1

All,

This is off topic for this group, however what is the consensus of the 17 
meter "Wonder Bar" antenna?

>From a stand point of low wind load and some directivity, this looks like a 
good project for my QTH.  I do have questions concerning tuning and spacing of 
the elements.  

First off, is this beam actually worth building?

I own the MFJ 249 (pre B version) and a Grid Dip Meter.  I would like to better 
understand how to tune the elements for resonance.

There were no formulae given or stated for construction of this beam or 
construction of a similar beam on another band.  A Google search did not yield 
much information.  I was contemplating ordering the older QST articles that 
were referenced.

73, 

Doug - N9XTF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>