The magic word is: PRESS NUT
BOB DD
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Barrie Smith
Sent: Tuesday, April 10, 2007 4:13 PM
To: amps@contesting.com; Pete Smith
Subject: Re: [Amps] RE : amp hardware
Another option is a device I use at times (can't remember the name at the
moment. It's at home and I'm at work.) is a largish pair of pliers that
presses a special nut into a certain hole size.
Captive nut?
Anyway, the pliers aren't really pliers, but are designed to sort of rivet
these special nuts intp an exact sized hole; the hole size depending upon
the size of the nut.
It also presses in standoff-type nuts, which are hand for mounting a panel
or board somewhat above the main chassis.
When I first obtained this device I experimented with it to see how strong
the system was. In a vice, and using large pliers, I bent 1/8' aluminum
well before I was able to pull the nut free.
73, Barrie, W7ALW
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|