My impression is that the 1 KW limit was regulatory rather than
technical. The amplifier is capable of rather more - mine puts out
900-1200 watts depending on band (including the exciter power, of course),
with about 100 watts drive and grid current well within ratings.
73, Pete N4ZR
At 06:53 PM 4/29/2007, Tom W8JI wrote:
> > The SB220 was designed to run about 600W output on CW, and
> > 1200W PEP on SSB output. It is a 1kW CW input, 2kW PEP SSB
> > **output** amplifier.
>
>I'm sorry, that should have said 1kW CW input 2kW PEP SSB
>**INPUT**...not 2kW PEP output.
>
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|