I spoke to Mike the technician at Ameritron yesterday and he totally advised
against using any type of heat dissipating cap on the anode of an 8877
stating it would disturb the air flow of the tube.
73
john-n4dsp
> You and Ron are free to do whatever you want including ripping off the
> gullible.
>
> If either one of you is able enough to read the specs you will find out
> that Eimac cautions AGAINST using that decorative cap as an attachment
> point.
>
> Of course there will always be some fools with more money than brains that
> will buy anything. That cooler is no more effective than the miracle fuel
> economy gizmos that have been sold for decades.
>
> I'm also getting mighty tired of Ron using several forums strictly as an
> advertising venue for his stuff. I have NEVER seen him contribute anything
> to a discussion.
>
> Carl
> KM1H
>
>
>
> ----- Original Message -----
> From: Gudguyham@aol.com
> To: km1h@jeremy.mv.com ; g4ftc@hotmail.com ; amps@contesting.com
> Sent: Saturday, August 25, 2007 7:09 AM
> Subject: Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps
>
>
> In a message dated 8/24/2007 9:52:32 P.M. Eastern Daylight Time,
> km1h@jeremy.mv.com writes:
> A fool and his money are soon seperated.
>
> Carl
> Carl, I am going to give Ron some good advice and urge him to get a
> patent on this!! I just bought a small metal bench lathe, such an item
> can be easily fashioned on one of those. Aluminum is pretty cheap. 73
> Lou
>
>
>
>
>
> ------------------------------------------------------------------------------
> Get a sneak peek of the all-new AOL.com.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.484 / Virus Database: 269.12.6/971 - Release Date: 8/24/2007
> 2:59 PM
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|