Has anyone tried the SSC-25 soft start controller from United
Automation for this purpose?
<http://www.powercontrollers.net/components/soft_start_module/specialised_power_products_ssc_25.asp>
73, Per
LA9XKA
At 08:04 03.02.2008, Patrick Egloff wrote:
>Hi All,
>
>The purpose of a step-start is (mainly) to let the HV caps load smoothly.
>
>The "classical" way to make a step-start is to short the resistor in the HV
>transformer primary with a relay switched after a delay made with an RC.
>This delay is mostly arbitrary put to 1 or 2 s.
>
>Why not switch this relay with a divider from the HV voltage ? With the
>right divider, you ensure that the caps are really loaded and not supposed
>to be ?
>
>Just a guess...
>
>73, Patrick.
>
>--
>Patrick Egloff - TK5EP
>email : pegloff@gmail.com
>Fax : +33 826 698 954
>Web page : http://tk5ep.free.fr
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|