Re: [Amps] Does coax loss depend on SWR?, Steve Katz, 2008/02/29

• Re: [Amps] Does coax loss depend on SWR?, JMLTINC, 2008/02/29

[Amps] Class-E Amplifiers, Bill Fuqua, 2008/02/29

• [Amps] Does coax loss depend on SWR?, Randy, 2008/02/29
• Re: [Amps] Class-E Amplifiers, jeremy-ca, 2008/02/29
  • Re: [Amps] Class-E Amplifiers, Bill Fuqua, 2008/02/29
    • Re: [Amps] Class-E Amplifiers, jeremy-ca, 2008/02/29
    • Re: [Amps] Class-E Amplifiers, Peter Frenning [OZ1PIF], 2008/02/29
  • Re: [Amps] Class-E Amplifiers, Jim Tonne, 2008/02/29
• Re: [Amps] Class-E Amplifiers, ToddRoberts2001, 2008/02/29
• Re: [Amps] Class-E Amplifiers, ToddRoberts2001, 2008/02/29

[Amps] filament tube life, turn on's and time on target, Artmouton, 2008/02/28

• Re: [Amps] filament tube life, turn on's and time on target, k7fm, 2008/02/28
• Re: [Amps] filament tube life, turn on's and time on target, jeremy-ca, 2008/02/28
• Re: [Amps] filament tube life, turn on's and time on target, rgroh, 2008/02/28

[Amps] Magcap Transformers, Mike Schlamp, 2008/02/27

• Re: [Amps] Magcap Transformers, Dino Darling, 2008/02/27
• [Amps] Magcap Transformers, chuck, 2008/02/29

[Amps] CW & SSB amp, Steve Flood, 2008/02/25

• Re: [Amps] CW & SSB amp, Robert Morris, 2008/02/25
• Re: [Amps] CW & SSB amp, jeremy-ca, 2008/02/25

[Amps] mfj meters for amp, Steve Flood, 2008/02/25

• Re: [Amps] mfj meters for amp, Roger, 2008/02/25

[Amps] Warrior power amplifier, John Lyles, 2008/02/24

• Re: [Amps] Warrior power amplifier, jeremy-ca, 2008/02/24

[Amps] how to wind an HF broadband 10:1 transformer, Dan Sawyer, 2008/02/24

• Re: [Amps] how to wind an HF broadband 10:1 transformer, jeremy-ca, 2008/02/24
  • Re: [Amps] how to wind an HF broadband 10:1 transformer, Dan Sawyer, 2008/02/24
    • Re: [Amps] how to wind an HF broadband 10:1 transformer, jeremy-ca, 2008/02/24
• Re: [Amps] how to wind an HF broadband 10:1 transformer, Dan Sawyer, 2008/02/24
• Re: [Amps] how to wind an HF broadband 10:1 transformer, Manfred Mornhinweg, 2008/02/26
  • Re: [Amps] how to wind an HF broadband 10:1 transformer, jeremy-ca, 2008/02/26
    • Re: [Amps] how to wind an HF broadband 10:1 transformer, Jim Brown, 2008/02/26
    • Re: [Amps] how to wind an HF broadband 10:1 transformer, jeremy-ca, 2008/02/26
• Re: [Amps] how to wind an HF broadband 10:1 transformer, Manfred Mornhinweg, 2008/02/28
  • Re: [Amps] how to wind an HF broadband 10:1 transformer, Jim Brown, 2008/02/28
    • Re: [Amps] how to wind an HF broadband 10:1 transformer, jeremy-ca, 2008/02/28
  • Re: [Amps] how to wind an HF broadband 10:1 transformer, jeremy-ca, 2008/02/28
    • Re: [Amps] how to wind an HF broadband 10:1 transformer, Peter Voelpel, 2008/02/28
  • Re: [Amps] how to wind an HF broadband 10:1 transformer, Jim Brown, 2008/02/28
  • Re: [Amps] how to wind an HF broadband 10:1 transformer, David Cutter, 2008/02/29

[Amps] Need SB-221 tuning cap (26-164), Charlie Ocker, 2008/02/24

• Re: [Amps] Need SB-221 tuning cap (26-164), W7RY, 2008/02/24
  • Re: [Amps] Need SB-221 tuning cap (26-164), Pete Smith, 2008/02/24
• Re: [Amps] Need SB-221 tuning cap (26-164), Charlie Ocker, 2008/02/27
• Re: [Amps] Need SB-221 tuning cap (26-164), Charlie Ocker, 2008/02/26
  • Re: [Amps] Need SB-221 tuning cap (26-164), jeremy-ca, 2008/02/26
• Re: [Amps] Need SB-221 tuning cap (26-164), Gudguyham, 2008/02/26

[Amps] Heathkit HA-10 Warrior, Allen Jones, 2008/02/23

• Re: [Amps] Heathkit HA-10 Warrior, jeremy-ca, 2008/02/23

Re: [Amps] SB220 w/5 3-500, Rob Atkinson, 2008/02/23

• Re: [Amps] SB220 w/5 3-500, jeremy-ca, 2008/02/23
• Re: [Amps] SB220 w/5 3-500, Gary Smith, 2008/02/24
• [Amps] SB220 w/5 3-500, Win, 2008/02/24
  • Re: [Amps] SB220 w/5 3-500, jeremy-ca, 2008/02/24

[Amps] Duration of time delay for soft start, john, 2008/02/22

• Re: [Amps] Duration of time delay for soft start, David Cutter, 2008/02/22
  • Re: [Amps] Duration of time delay for soft start, jeremy-ca, 2008/02/22

[Amps] SB-220 w/5 3-500, Mark -AA6DX, 2008/02/22

• Re: [Amps] SB-220 w/5 3-500, RICHARD GEORGE, 2008/02/22
  • Re: [Amps] SB-220 w/5 3-500, Roger, 2008/02/22
    • Re: [Amps] SB-220 w/5 3-500, Alex Malyava, 2008/02/22
    • Re: [Amps] SB-220 w/5 3-500, jeremy-ca, 2008/02/22
    • Message not available
    • Re: [Amps] SB-220 w/5 3-500, Steve Berg, 2008/02/22

[Amps] complete new guy, Kelly McNutt, 2008/02/21

• Re: [Amps] complete new guy, bills stuff, 2008/02/21

Re: [Amps] Needed Info, Oleg, RA3DNC, 2008/02/21

• Re: [Amps] Needed Info, Roger D Johnson, 2008/02/21
  • Re: [Amps] Needed Info, Jim Tonne, 2008/02/21
    • Re: [Amps] Needed Info, kenw2dtc, 2008/02/21
  • Re: [Amps] Needed Info, jeremy-ca, 2008/02/21
• Re: [Amps] Needed Info, Cliff - W4NJ, 2008/02/21

[Amps] FAA AM-6154 trouble, Larry, 2008/02/19

• Re: [Amps] FAA AM-6154 trouble, RICHARD GEORGE, 2008/02/19

[Amps] (no subject), Dan Hearn, 2008/02/19

• Re: [Amps] (no subject), Dan Hearn, 2008/02/19
  • Re: [Amps] (no subject), jeremy-ca, 2008/02/19
  • Re: [Amps] (no subject), Scott McGrath, 2008/02/19
• [Amps] (no subject), jcowens1, 2008/02/25

[Amps] SWR / forward / reverse power with PIC, Matt Tucker, 2008/02/18

• Re: [Amps] SWR / forward / reverse power with PIC, Steve Thompson, 2008/02/20

[Amps] RF Parts Channel; Television Broadcast Equipment, Pat Barthelow, 2008/02/18

• Re: [Amps] RF Parts Channel; Television Broadcast Equipment, Joe Subich, W4TV, 2008/02/18
  • Re: [Amps] RF Parts Channel; Television Broadcast Equipment, Bill Fuqua, 2008/02/18
• Re: [Amps] RF Parts Channel; Television Broadcast Equipment, JMLTINC, 2008/02/18

[Amps] #10 Teflnon Needed, W7RY, 2008/02/16

• Re: [Amps] #10 Teflon Needed, schuetzen, 2008/02/16
  • Re: [Amps] #10 Teflon Needed, jeremy-ca, 2008/02/17
    • Re: [Amps] #10 Teflon Needed, schuetzen, 2008/02/17
    • Re: [Amps] #10 Teflon Needed, jeremy-ca, 2008/02/17
  • Re: [Amps] #10 Teflon Needed, Joe Giacobello, 2008/02/17
• Re: [Amps] #10 Teflnon FOUND!, W7RY, 2008/02/19

Re: [Amps] Vacuum Variable Fatigue Failures, ToddRoberts2001, 2008/02/16

• Re: [Amps] Vacuum Variable Fatigue Failures, Saandy Eban, 2008/02/17

[Amps] Can you identify this tube ??, kenw2dtc, 2008/02/16

• Re: [Amps] Can you identify this tube ??, John D'Ausilio, 2008/02/16
  • Re: [Amps] Can you identify this tube ??, kenw2dtc, 2008/02/16

[Amps] Selling 2x Eimac 3-500's (UK), Paul Young, 2008/02/15

• [Amps] Command Inc. ?, Andy GD0TEP, 2008/02/15
• Re: [Amps] Selling 2x Eimac 3-500's (UK), W7RY, 2008/02/15
• [Amps] ceramic relays, LA6FJA/K3RAG Stein Roar Brobakken, 2008/02/23

[Amps] commercial amplifier cooling, DEHAYS Dominique, 2008/02/14

• Message not available
  • Re: [Amps] commercial amplifier cooling, Pete Smith, 2008/02/14
    • Re: [Amps] commercial amplifier cooling, schuetzen, 2008/02/14
    • Re: [Amps] commercial amplifier cooling, Pete Smith, 2008/02/14
    • Re: [Amps] commercial amplifier cooling, Roger, 2008/02/14
    • Re: [Amps] commercial amplifier cooling, Gary Smith, 2008/02/14

[Amps] Looking for eimac 3-500Z, Imam YB4IR, 2008/02/13

• Re: [Amps] Looking for eimac 3-500Z, Steven Grant, W4IIV, 2008/02/13
  • Re: [Amps] Looking for eimac 3-500Z, DEHAYS Dominique, 2008/02/14
    • Re: [Amps] Looking for eimac 3-500Z, jeremy-ca, 2008/02/14

Re: [Amps] filament supply d.c. or a.c., Roy, 2008/02/13

• Re: [Amps] filament supply d.c. or a.c., d.cutter, 2008/02/14

[Amps] Looking for fan information, Patrick Egloff, 2008/02/13

• Re: [Amps] Looking for fan information, John E. Cleeve, 2008/02/13

[Amps] filament supply D.C or A.C, eran, 2008/02/13

• Re: [Amps] filament supply D.C or A.C, k7fm, 2008/02/13
  • Re: [Amps] filament supply D.C or A.C, Patrick Egloff, 2008/02/13
  • Re: [Amps] filament supply D.C or A.C, jeremy-ca, 2008/02/13
• Re: [Amps] filament supply D.C or A.C, d.cutter, 2008/02/13

[Amps] Silver oxide is an insulator, Tom McDermott, 2008/02/12

• Re: [Amps] Silver oxide is an insulator, David Cutter, 2008/02/13
  • Re: [Amps] Silver oxide is an insulator, jeremy-ca, 2008/02/13

[Amps] Much ado about silver, john, 2008/02/12

• Re: [Amps] Much ado about silver, Larry, 2008/02/12

[Amps] Anyone heard of a Delcon T210 amp?, F. Veitch, 2008/02/11

• Re: [Amps] Anyone heard of a Delcon T210 amp?, AB5MM, 2008/02/16

[Amps] Silver, Larry, 2008/02/11

• Re: [Amps] Silver, Scott McGrath, 2008/02/11
  • Re: [Amps] Silver, Mike Schatzberg, 2008/02/12
    • Re: [Amps] Silver, Scott McGrath, 2008/02/12
    • Re: [Amps] Silver, John E. Cleeve, 2008/02/12
    • Re: [Amps] Silver, David Cutter, 2008/02/12
    • Re: [Amps] Silver, Scott McGrath, 2008/02/12
    • Re: [Amps] Silver, jeremy-ca, 2008/02/12
    • Re: [Amps] Silver, gdaught6, 2008/02/12
    • Re: [Amps] Silver, LA7SL Nils P. Pedersen, 2008/02/12
    • Re: [Amps] Silver, David Cutter, 2008/02/12
    • Re: [Amps] Silver, LA7SL Nils P. Pedersen, 2008/02/12
  • Re: [Amps] Silver, Larry, 2008/02/12
    • Re: [Amps] Silver, David Cutter, 2008/02/12
• Re: [Amps] Silver, N7SC, 2008/02/11

[Amps] Items fs, k7rdx, 2008/02/11

• Re: [Amps] Items fs, k7rdx, 2008/02/13

Re: [Amps] 2N1159, Fuqua, Bill L, 2008/02/10

• Re: [Amps] 2N1159, jeremy-ca, 2008/02/10

[Amps] SB-220 on 6 meters: looking for projects..., it9blb, 2008/02/07

• Re: [Amps] SB-220 on 6 meters: looking for projects..., Han Higasa, 2008/02/08
• Re: [Amps] SB-220 on 6 meters: looking for projects..., Han Higasa, 2008/02/11
  • [Amps] Vacuum Variable Fatigue Failures, Pat Barthelow, 2008/02/16
  • Re: [Amps] SB-220 on 6 meters: looking for projects..., Han Higasa, 2008/02/21

[Amps] More on using a PIC processor inside HF amp, Hugh Duff, 2008/02/06

• Re: [Amps] More on using a PIC processor inside HF amp, David G4FTC, 2008/02/07
  • Re: [Amps] More on using a PIC processor inside HF amp, Jim Tonne, 2008/02/07

Re: [Amps] PIC processor inside HF amp, Patrick, 2008/02/05

• Re: [Amps] PIC processor inside HF amp, jeff millar, 2008/02/05
• [Amps] PIC processor inside HF amp, Matt Tucker, 2008/02/05
• Re: [Amps] PIC processor inside HF amp, pc5m, Carel, 2008/02/06

Re: [Amps] Amps Digest, Vol 62, Issue 3, Sugiyama, 2008/02/04

• Re: [Amps] Amps Digest, Vol 62, Issue 3, d.cutter, 2008/02/04

[Amps] EB104 600W HF amplifier questions, Matt Tucker, 2008/02/03

• Re: [Amps] EB104 600W HF amplifier questions, Steve Thompson, 2008/02/05
• [Amps] EB104 600W HF amplifier questions, Matt Tucker, 2008/02/05

[Amps] 3-500C tube ?, Patrick Egloff, 2008/02/03

• Re: [Amps] 3-500C tube ?, Dave Weiss, 2008/02/03

[Amps] QRO-parts - sound kinda fishy now, steve d, 2008/02/03

• Re: [Amps] QRO-parts - sound kinda fishy now, N7SC, 2008/02/03

[Amps] Step start, Patrick Egloff, 2008/02/03

• Re: [Amps] Step start, kenw2dtc, 2008/02/03
• Re: [Amps] Step start, Don Kessler, 2008/02/03
• Message not available
  • Re: [Amps] Step start, Per Molund, 2008/02/03
    • Re: [Amps] Step start, David Cutter, 2008/02/03
• Re: [Amps] Step start, Han Higasa, 2008/02/03
• Re: [Amps] Step start, Peter Voelpel, 2008/02/03
  • Re: [Amps] Step start, David Cutter, 2008/02/03
    • Re: [Amps] Step start, Peter Voelpel, 2008/02/03
    • Re: [Amps] Step start, Gary Schafer, 2008/02/03
    • Re: [Amps] Step start, Patrick Egloff, 2008/02/03
• Re: [Amps] Step start, Radio WC6W, 2008/02/03
• Re: [Amps] Step start, Steve Thompson, 2008/02/05
  • Re: [Amps] Step start, Han Higasa, 2008/02/06
    • Re: [Amps] Step start, Ian White GM3SEK, 2008/02/07
    • Re: [Amps] Step start, aborg, 2008/02/07
    • Re: [Amps] Step start, Patrick Egloff, 2008/02/08
    • Re: [Amps] Step start, aborg, 2008/02/08
    • Re: [Amps] Step start, Han Higasa, 2008/02/08
• Re: [Amps] Step start, Steve Thompson, 2008/02/07

Re: [Amps] 3-400, Gudguyham, 2008/02/01

• Re: [Amps] 3-400, jeremy-ca, 2008/02/01
• Re: [Amps] 3-400, Mike McCarthy, W1NR, 2008/02/02