Thanks for all the great suggestions! I have some wire on the way! Thanks to
the list!!
I using the tank circuit design based on the amplifier in the 2008 handbook by
K8RA. He uses torrids for both the 80 and 160 meter Pi coils. As well as the L
network coil. the L network coil is #12 bare tined with Teflon tubing covering
the wire.
Thanks again Guys!!
73
Jim W7RY
----- Original Message -----
From: W7RY
To: amps@contesting.com
Sent: Saturday, February 16, 2008 4:11 PM
Subject: [Amps] #10 Teflnon Needed
I'm in need of 15-20 feet of #10 AWG Teflon wire. Anyone have some they want
to sell? Or a good source other than surplus rip-off of Nebraska?
Thanks!
73
Jim W7RY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|