I would suspect that the fan was originally intended for use with natural
gas heating systems, since that is how the Precision Fans company was listed
prior to their take over by Smiths Industries.......John G3JVC.
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Patrick Egloff
Sent: 13 February 2008 15:53
To: AMPS
Subject: [Amps] Looking for fan information
Hi All,
A friend of mine gave me a new squirrel cage fan for which i can't find any
information even with Goooooogle...
I suppose it's an old production, but it has never been used... and i badly
need one for my 2m amp project !
So i would be mostly gratefull if somebody has some infos about this fan :
SMITHS INDUSTRIES
PRECISION FAN COMPANY
Witney Oxon England
Code n° : FFB 0205 004
The motor is made by MYCALEX MOTORS and has part number L9-24-048.202, it's
a 230V 50 Hz.
Unfortunately, applying the required voltage makes the motor only vibrate.
Putting a 4uF capacitor in series did not help...
Any idea, any help ?
Thanks in advance,
--
Patrick Egloff - TK5EP
email : pegloff@gmail.com
Fax : +33 826 698 954
Web page : http://tk5ep.free.fr
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
This email has been verified as Virus free.
Virus Protection and more available at http://www.plus.net
_______________________________________
No viruses found in this incoming message
Scanned by iolo AntiVirus 1.5.1.4
http://www.iolo.com
_______________________________________
No viruses found in this outgoing message
Scanned by iolo AntiVirus 1.5.1.4
http://www.iolo.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|