Im out of them also, they go on Ebay as soon as I pull one out.
The swap requires drilling a new rear hole as well as obtaining an aluminum
spacer to connect the mounting plate to the tank coil.
Bandswitch arcing can be eliminated by connecting a 10-12pf cap between the
80-40M positions right at the switch. Either a 1KV or larger mica or a 5KV
doorknob works. It acts as a snubber for the very high circulating voltage
caused by the shorted turn effect and is something Measures never could
understand.
Another cause of switch arcing is cold solder joints at either end of the
RG-8 shield clamps.
Carl
KM1H
----- Original Message -----
From: "Charlie Ocker" <N9CO@aol.com>
To: "Amps Reflector" <amps@contesting.com>
Sent: Tuesday, February 26, 2008 5:55 AM
Subject: Re: [Amps] Need SB-221 tuning cap (26-164)
> w7ry@arrl.net wrote:
>> > RF parts has them in stock.
>> > 73
>> > Jim W7RY
>
> I've already checked with RF parts, and they do not have the 26-164.
> They have the older 26-131. The wording in their catalog is misleading.
>
> 73,
> Charlie N9CO
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|