Use 572B's for more dissipation and take advantage of the higher B+. Add a
small cooling fan.. For CW/SSB go to a capacitor filter and lose the choke
if Heyboers xfmr can handle it.
Carl
KM1H
----- Original Message -----
From: "Allen Jones" <w9dz@yahoo.com>
To: <amps@contesting.com>
Sent: Saturday, February 23, 2008 9:47 PM
Subject: [Amps] Heathkit HA-10 Warrior
>I am in the process of refurbing a Heathkit HA-10
> Warrior amp. I have looked at some of the old threads
> dealing with this amp and have a couple of questions.
>
> The 866's will go in favor of plug-in solid state
> replacements. Am I going to end up with a lot of
> extra B plus? The power supply is choke input to a 8
> Mfd capacitor. Would a step-start circuit be of any
> value or will the choke be enough to limit the surge?
>
> Are the original parasitic chokes sufficient or should
> I replace them with something different?
>
> This amp has had two plate transformers fail for the
> previous owner. He used the amp on RTTY. I got a new
> transformer from Heyboer and asked them to build it
> for CCS. The vast majority of my operation will be
> SSB. I plan to scrap the fixed bias supply and go with
> a zener in the center tap of the filament xfmr in
> series with a high value resistor which will be
> shorted with a relay in transmit. I will ground the
> grids of the 811's directly to the chassis with heavy
> braid or copper strap.
>
> Any other suggestions?
>
> Thanks
>
> Allen Jones, W9DZ
>
>
>
> ____________________________________________________________________________________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile. Try it now.
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|