Once upon a time there was a note about using a 3055ish transistor as a
"pass" with a low wattage zenier on the base, making it think it was a
high power, to supply bias. Gotta pack for a trip, before I could look
in this mess....
Lee Buller wrote:
>
> Several years ago, there was an article about using a 2N3055 as a switching
> transistor in the B- of a linear amp. The 2N3055 or it could have been a
> TIP49, was used to act as a "relay" when the transistor was turned on. Does
> anyone remember that article and have a reference point to look at? Gee, I
> am not usre I've made myself clear here.
>
> Lee - K0WA
>
>
>
> In our day and age it seems that Common Sense is in short supply. If you
> don't have any Common Sense - get some Common Sense and use it. If you can't
> find any Common Sense, ask for help from somebody who has some Common Sense.
> Is Common Sense divine?
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|