Amps Mailing List (date)

Amps Mailing List (date)

[Thread Index] [Top] [All Lists]

April 30, 2008

[Amps] Henry 3004A 70cm amp, Andy GD0TEP, 12:45
[Amps] Thermal Delay Relays, George Knight, 12:37
[Amps] 2 x 3/400z, Juan Pablo Ravinale, 06:10

April 29, 2008

Re: [Amps] Alpha PA-77 (not D or S) Questions, Paul Christensen, 19:21
[Amps] Alpha PA-77 (not D or S) Questions, k6xx@juno.com, 18:43
Re: [Amps] Subject: WTB: Legal Limit 6m Amplifier or Project, jeremy-ca, 14:48
[Amps] Subject: WTB: Legal Limit 6m Amplifier or Project, Merle Bone, 14:24
[Amps] WTB: Legal Limit 6m Amplifier or Project, Robin Midgett, 09:30
Re: [Amps] current in primary of microwave oven transformer, Angel Vilaseca, 08:37

April 28, 2008

Re: [Amps] Test, Gary Hinson, 22:46
[Amps] 30S-1 wanted, kingwood, 19:12
[Amps] current in primary of microwave oven transformer, Tom Carney, 16:51
[Amps] Electrolytic Capacitor, Tim Haney, 16:51
[Amps] Test, Harold Mandel, 16:11
Re: [Amps] Buck Boost, Barrie Smith, 15:50
[Amps] Fwd: Re: Buck Boost, Commander John, 14:48
Re: [Amps] Buck Boost, jeremy-ca, 14:31
Re: [Amps] Buck Boost, Robert Groh, 13:47
Re: [Amps] Buck Boost, Patrick Egloff, 12:40
[Amps] Buck Boost, Barrie Smith, 12:07
Re: [Amps] current in primary of microwave oven transformer, Manfred Mornhinweg, 10:20
Re: [Amps] current in primary of microwave oven transformer, Angel Vilaseca, 08:23

April 27, 2008

Re: [Amps] current in primary of microwave oven transformer, Steve Thompson, 02:51

April 26, 2008

[Amps] AMPLIFIER PARTS WANTED, Wt8r, 20:30
[Amps] Bird Switch, Marv Gonsior, 18:37
[Amps] Bird 74 Coax Switch FS, Marv Gonsior, 18:10
Re: [Amps] help with rectifiers, etc., Roy, 10:53
Re: [Amps] current in primary of microwave oven transformer, Dr. David Kirkby, 04:22

April 25, 2008

Re: [Amps] current in primary of microwave oven transformer, Manfred Mornhinweg, 21:40
[Amps] Help with hv rectifiers, filter caps, etc, Fern Rivard, 20:36
Re: [Amps] turns counter, Bob Maser, 14:55
[Amps] turns counter, Steve Flood, 14:33
[Amps] Parts For Sale, Jennings, 10:28
[Amps] CAI CL-36 Autotune HF amplifier, Jerry Muller, 10:27
[Amps] current in primary of microwave oven transformer, Tom Carney, 10:27

April 24, 2008

Re: [Amps] tube socket differences, kenw2dtc, 22:14
[Amps] tube socket differences, Larry, 21:00
[Amps] re hv electrolytic capacitors, Fern Rivard, 20:12
Re: [Amps] current in primary of microwave oven transformer, Alex, 12:08
Re: [Amps] current in primary of microwave oven transformer, Angel Vilaseca, 12:08
[Amps] current in primary of microwave oven transformer, Skip Macaulay, 12:08
Re: [Amps] 4-1000 HB amp, Dan Hearn, 11:43
[Amps] 4-1000 HB amp, k1um, 11:13
Re: [Amps] current in primary of microwave oven transformer, David Ackrill, 11:09
Re: [Amps] current in primary of microwave oven transformer, David Ackrill, 10:46
Re: [Amps] current in primary of microwave oven transformer, Dr. David Kirkby, 08:57
Re: [Amps] current in primary of microwave oven transformer, d.cutter, 07:42
Re: [Amps] current in primary of microwave oven transformer, David Ackrill, 05:31

April 23, 2008

Re: [Amps] Dentron DTR 2000L Linear, jeremy-ca, 19:00
[Amps] interesting RF amplifier patents discussed over there, John Lyles, 17:32
Re: [Amps] HF Autoband AMp Prefences, Lee Buller, 17:25
[Amps] HF Autoband AMp Prefences, jsternmd, 17:08
[Amps] Re2: Dentron DTR 2000L Linear, k9mk, 15:38
Re: [Amps] Dentron DTR 2000L Linear, Roger (K8RI), 14:28
Re: [Amps] Dentron DTR 2000L Linear, n8de, 13:59
[Amps] Dentron DTR 2000L Linear, Lee Buller, 12:57
Re: [Amps] Tl-922 plate meter protection, Kees - pa7two, 11:13
Re: [Amps] Tl-922 plate meter protection, Missouri Guy, 10:28
Re: [Amps] current in primary of microwave oven transformer, Alex, 10:19
[Amps] Tl-922 plate meter protection, slonim aron, 08:33
Re: [Amps] current in primary of microwave oven transformer, David Ackrill, 08:31
Re: [Amps] current in primary of microwave oven transformer, Dr. David Kirkby, 05:08
Re: [Amps] current in primary of microwave oven transformer, d.cutter, 03:28
[Amps] current in primary of microwave oven transformer, Angel Vilaseca, 02:33

April 22, 2008

[Amps] Ceramic GU43B socket including capacitors for sale, Kees - pa7two, 15:13
Re: [Amps] SB-200 RFC2 28uH choke, jeremy-ca, 12:28

April 21, 2008

[Amps] Thanks for all the responses re SK-416 chimney, Fern Rivard, 19:55
[Amps] Gonset GSB-101 lookalike, craig brammer, 19:41
Re: [Amps] need info re Eimac SK-416 chimney, kenw2dtc, 18:29
Re: [Amps] need info re Eimac SK-416 chimney, gdaught6, 18:27
[Amps] need info re Eimac SK-416 chimney, Fern Rivard, 18:04
Re: [Amps] 3CX3000A7 input impedance, Dr. David Kirkby, 17:09
[Amps] National choke needed, David Edwards, 15:27
Re: [Amps] 3CX3000A7 input impedance, Roger (K8RI), 13:49
Re: [Amps] 3CX3000A7 input impedance, Dr. David Kirkby, 13:09
Re: [Amps] 3CX3000A7 input impedance, Jim Tonne, 12:36
Re: [Amps] 3CX3000A7 input impedance, Dr. David Kirkby, 12:19
[Amps] SB-200 RFC2 28uH choke, Mike Short, 09:47
Re: [Amps] 3CX3000A7 input impedance, jeremy-ca, 08:36
Re: [Amps] 3CX3000A7 input impedance, Dr. David Kirkby, 07:04
Re: [Amps] 3CX3000A7 input impedance, Peter Voelpel, 03:06
Re: [Amps] 3CX3000A7 input impedance, Dr. David Kirkby, 02:54

April 20, 2008

[Amps] Looking for someone to bring a transformer back from Dayton, jeremy-ca, 12:09

April 18, 2008

Re: [Amps] Amps Digest, Vol 64, Issue 29, DC, 16:02
Re: [Amps] Amps Digest, Vol 64, Issue 29, k7rdx, 13:11
Re: [Amps] Fabrication & part placement, Manfred Mornhinweg, 13:01
Re: [Amps] Fabrication & part placement, Alex, 12:37
Re: [Amps] Amps Digest, Vol 64, Issue 29, Mike Saculla, 12:06
Re: [Amps] Fabrication & part placement, gdaught6, 11:54
[Amps] Various, Edwin Karl, 11:40
Re: [Amps] Fabrication & part placement, Roger Parsons, 07:57
Re: [Amps] Fw: AL-80A Problem, Ian White GM3SEK, 02:20

April 17, 2008

Re: [Amps] Fabrication & part placement, kg7hf, 18:11
Re: [Amps] Fabrication & part placement, jeremy-ca, 14:07
Re: [Amps] Fabrication & part placement, Bob Bruno - K2KI, 13:57
Re: [Amps] Fabrication & part placement, Colin Lamb, 13:51
[Amps] Fabrication & part placement, kg7hf, 13:36
[Amps] Fw: AL-80A Problem, Mark McCloud, 12:46
Re: [Amps] 3CX3000A7 input impedance, jeremy-ca, 09:26
Re: [Amps] 3 1/8 to 7/16 ?, Jan Erik Holm, 02:57
Re: [Amps] 3CX3000A7 input impedance, Jan Erik Holm, 02:40
Re: [Amps] 3 1/8 to 7/16 ?, Jan Erik Holm, 02:28
Re: [Amps] 3 1/8 to 7/16 ?, Jan Erik Holm, 02:24

April 16, 2008

Re: [Amps] 3 1/8 to 7/16 ?, Andy GD0TEP, 19:48
Re: [Amps] 12v interruption, k7fm, 19:24
Re: [Amps] 12v interruption, k7rdx, 16:15
Re: [Amps] 3 1/8 to 7/16 ?, Jeff Carter, 15:28
[Amps] Ten Tec Titan 425 Production Changes, Lee Buller, 15:21
[Amps] 3CX3000A7 input impedance, Dick Hanson, 14:53
Re: [Amps] 12v interruption, jeremy-ca, 14:30
Re: [Amps] 3CX3000A7 input impedance, Phil Clements, 14:02
[Amps] 12v interruption, Larry Ravlin, 13:59
[Amps] 3CX3000A7 input impedance, Bob Maser, 13:53
Re: [Amps] 3 1/8 to 7/16 ?, Andy GD0TEP, 13:34
Re: [Amps] 3 1/8 to 7/16 ?, Karl-Arne Markström, 13:06
[Amps] Peter Dahl stock transformers, kingwood, 12:45
[Amps] National Tubes, David N., 07:50

April 15, 2008

[Amps] Alpha 77sx bandswitch for sale, k9sd, 21:17
Re: [Amps] where to interrupt power, Mike, 21:08
Re: [Amps] where to interrupt power, jeremy-ca, 20:56
[Amps] where to interrupt power, Larry Ravlin, 20:31
[Amps] Drake L7 bandswitch needed, Felipe Ceglia - PY1NB, 20:27
[Amps] bandswitch question, Steve Flood, 19:16
Re: [Amps] Suggestions for Storage of Amps and Radios, Mike, 18:56
Re: [Amps] Suggestions for Storage of Amps and Radios, Dr. David Kirkby, 18:30
[Amps] Abuse of a 4-1000, Paul Whatton, 18:06
[Amps] 3 1/8 to 7/16 ?, Jeff Carter, 17:50
[Amps] 3 1/8 to 7/16 ?, Andy GD0TEP, 17:18
[Amps] meter repair, Dennis, 16:58
[Amps] More Peter Dalh stock, kingwood, 16:00
Re: [Amps] Marshall 811A's and message from RF Parts, George, 15:57
[Amps] Marshall 811A's and message from RF Parts, jeremy-ca, 14:40
[Amps] Nut needed, RICHARD GEORGE, 14:06
[Amps] Fw: Peter Dahl transformers, kingwood, 12:10

April 14, 2008

[Amps] Off topic but may be interesting to someone here !, LA7SL Nils P. Pedersen, 15:52
Re: [Amps] 8873...spoken for, Roy, 13:54
[Amps] NOS RCA 811A FS, jeremy-ca, 12:32
[Amps] 8873 available for SB-230, Roy, 12:10
Re: [Amps] Amps Digest, Vol 64, Issue 24, WarrenWolff, 11:37
Re: [Amps] Bias Scheme, Steve Thompson, 03:01

April 13, 2008

[Amps] AL-80A Problem, Mark McCloud, 23:00
Re: [Amps] gs35b tube, Harry Brown, 14:28
[Amps] FS: AMP PROJECT CABINETS, JimMoci, 12:26
[Amps] SK-1A sockets for sale, Kees - pa7two, 08:31

April 12, 2008

[Amps] Bruene Coupler Needed, W7RY, 22:01
Re: [Amps] gs35b tube, Evert Bakker \(PA2KW\), 17:02
Re: [Amps] gs35b tube, Andy GD0TEP, 16:48
[Amps] gs35b tube, K8LEEWMM, 16:31

April 11, 2008

Re: [Amps] Suggestions for Storage of Amps and Radios, TROY SINGLETON-N5ARK, 18:37
Re: [Amps] Suggestions for Storage of Amps and Radios, Dan Hearn, 17:08
Re: [Amps] filament voltage and current, kg7hf, 16:58
Re: [Amps] filament voltage and current, jeremy-ca, 16:29
[Amps] Suggestions for Storage of Amps and Radios, Harold Mandel, 16:04
Re: [Amps] Suggestions for Storage of Amps and Radios, Anthony Rick, 16:01
Re: [Amps] Replacement of plate caps on glass tubes, K6QD, 15:59
[Amps] Suggestions for Storage of Amps and Radios, TROY SINGLETON-N5ARK, 15:44
[Amps] filament voltage and current, kg7hf, 13:08
Re: [Amps] 3-500Z filament voltage and current, Larry, 11:06
Re: [Amps] Gonset 903a cure for self-oscillation?, Steve Katz, 10:49
[Amps] The B- Rail, Harold Mandel, 10:14
Re: [Amps] B minus connection, George, 09:38
[Amps] B minus connection, Steve Flood, 09:07
Re: [Amps] Looking for a Amp Supply LK500C schematic?, jeremy-ca, 08:00
[Amps] Looking for a Amp Supply LK500C schematic?, Randy.Randall, 00:25

April 10, 2008

[Amps] Gonset 903a cure for self-oscillation?, Larry, 22:43
Re: [Amps] Bias Scheme, Lee Buller, 22:25
Re: [Amps] Bias Scheme, Robert Morris, 21:55
[Amps] Bias Scheme, Lee Buller, 21:38
[Amps] power supplies, k9sd, 20:56
Re: [Amps] 3-500Z filament voltage and current, Chuck Curran, 20:42
Re: [Amps] Dual power supplies in EB104 4X MRF150 design, David Cutter, 18:10
[Amps] 3-500Z filament voltage and current, Larry, 17:54
Re: [Amps] Replacement of plate caps on glass tubes, Kees - pa7two, 17:34
Re: [Amps] AL-80A HV Glitch, jeremy-ca, 15:23
Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Harold Mandel, 15:00
Re: [Amps] AL-80A HV Glitch, George, 14:46
Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Anthony Rick, 14:18
Re: [Amps] AL-80A HV Glitch, Gudguyham, 13:43
Re: [Amps] Replacing 811A with 572B//4CX800A, Peter Voelpel, 13:28
[Amps] AL-80A HV Glitch, Mark McCloud, 13:25
Re: [Amps] Replacing 811A with 572B, jeremy-ca, 13:10
Re: [Amps] Replacement of plate caps on glass tubes, jeremy-ca, 12:59
Re: [Amps] Dual power supplies in EB104 4X MRF150 design, kg7hf, 12:50
Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Anthony Rick, 11:33
Re: [Amps] Replacement of plate caps on glass tubes, Bob Bruno - K2KI, 11:13
[Amps] Replacement of plate caps on glass tubes, K6QD, 10:42
Re: [Amps] Replacing 811A with 572B, Peter Voelpel, 10:14
Re: [Amps] Replacing 811A with 572B, jeremy-ca, 09:17
Re: [Amps] Replacing 811A with 572B, jeremy-ca, 09:07
Re: [Amps] Replacing 811A with 572B, jeremy-ca, 08:54
Re: [Amps] Replacing 811A with 572B, jeremy-ca, 08:45
Re: [Amps] Dual power supplies in EB104 4X MRF150 design, d.cutter, 03:21
Re: [Amps] Replacing 811A with 572B, Scott Manthe, 00:23
Re: [Amps] Replacing 811A with 572B, Joe Subich, W4TV, 00:22
Re: [Amps] Replacing 811A with 572B, Joe Subich, W4TV, 00:12

April 09, 2008

Re: [Amps] Replacing 811A with 572B, Bill Fuqua, 23:37
Re: [Amps] Replacing 811A with 572B, Scott Manthe, 23:29
Re: [Amps] Replacing 811A with 572B, Paul M Dunphy, 23:23
Re: [Amps] Replacing 811A with 572B, Joe Subich, W4TV, 22:58
Re: [Amps] Replacing 811A with 572B, Paul M Dunphy, 22:47
Re: [Amps] Replacing 811A with 572B, Roger (K8RI), 22:36
Re: [Amps] Replacing 811A with 572B, jeremy-ca, 22:28
Re: [Amps] Replacing 811A with 572B, Scott Manthe, 22:07
Re: [Amps] Replacing 811A with 572B, Scott Manthe, 21:44
Re: [Amps] Replacing 811A with 572B, k7fm, 20:31
Re: [Amps] Replacing 811A with 572B, Joe Subich, W4TV, 20:23
Re: [Amps] Replacing 811A with 572B, Bert Almemo, 20:23
Re: [Amps] Replacing 811A with 572B, Bill Fuqua, 20:19
Re: [Amps] Replacing 811A with 572B, jeremy-ca, 20:04
Re: [Amps] Replacing 811A with 572B, Scott Manthe, 19:58
Re: [Amps] Replacing 811A with 572B, Paul M Dunphy, 19:45
[Amps] Replacing 811A with 572B, Bert Almemo, 19:37
Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Anthony Rick, 16:21
Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Oleg Skydan, 12:53

April 08, 2008

Re: [Amps] mounting a vacuum cap, Harold Mandel, 09:34
[Amps] mounting a vacuum cap, Steve Flood, 06:41
Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Steve Thompson, 03:06

April 07, 2008

Re: [Amps] LEGAL LIMIT PLUS AMP ALPHA 77D, Jim Brown, 20:14
Re: [Amps] Small crack on band switch, Gary Smith, 19:19
Re: [Amps] Small crack on band switch, Steve Katz, 18:36
Re: [Amps] Small crack on band switch, George Cortez Jr, 18:34
Re: [Amps] Viewstar PT 1000a, jerome schatten, 16:49
Re: [Amps] Small crack on band switch, Anthony Rick, 16:33
Re: [Amps] Small crack on band switch, jeremy-ca, 16:18
[TenTec] LEGAL LIMIT PLUS AMP ALPHA 77D, W1dxh, 16:15
Re: [Amps] Small crack on band switch, Anthony Rick, 16:00
Re: [Amps] Viewstar PT 1000a, Mike, 15:50
Re: [Amps] Viewstar PT 1000a, W7RY, 15:39
[Amps] Small crack on band switch, Andy Pfeiffer, 15:29
Re: [Amps] Viewstar PT 1000a, jeremy-ca, 15:15
Re: [Amps] Dual power supplies in EB104 4X MRF150 design, Rob Frohne, 13:15
[Amps] Viewstar PT 1000a, K4elv@bellsouth,net, 12:51
[Amps] Dual power supplies in EB104 4X MRF150 design, Anthony Rick, 12:34
Re: [Amps] HV step start, Harold Mandel, 07:19

April 06, 2008

[Amps] FS: MRF317 & PT9730,31 &32 transitors, JimMoci, 12:01

April 05, 2008

[Amps] 425 titans, W1dxh, 12:17
[Amps] HV step start, Steve Flood, 12:09
Re: [Amps] Glass Vs. Ceramic?, jeremy-ca, 11:24
Re: [Amps] Glass Vs. Ceramic?, Gary Smith, 11:09
Re: [Amps] Glass Vs. Ceramic?, Gary Smith, 11:08
[Amps] Glass Vs. Ceramic?, R. David Eagle, 09:34

April 04, 2008

[Amps] GU84B, Evert Bakker \(PA2KW\), 01:14

April 03, 2008

[Amps] tl922 mods, Hi3tej hi3tej, 20:27
Re: [Amps] Opinion on the AL800?, Gary Smith, 17:58
Re: [Amps] YC-156 grid ring, k7rdx, 17:32
Re: [Amps] 8877 dishwasher?, Norman Hockler, 16:25
Re: [Amps] YC-156 grid ring, Norman Hockler, 16:22
[Amps] Fw: 2008 Shelby Hamfest, Keith E. Spainhour, 15:57
Re: [Amps] YC-156 grid ring, Andy GD0TEP, 14:58
Re: [Amps] Relays, Paul Kelley N1BUG, 14:27
Re: [Amps] Opinion on the AL800?, gdaught6, 14:02
Re: [Amps] Opinion on the AL800?, Gary Smith, 12:54
Re: [Amps] 8877 dishwasher?, Phil Clements, 12:36
Re: [Amps] YC-156 grid ring, Phil Clements, 12:31
Re: [Amps] Opinion on the AL800?, jeremy-ca, 11:51
[Amps] Opinion on the AL800?, Lee Buller, 09:25
Re: [Amps] 8877 dishwasher?, jeremy-ca, 08:09
Re: [Amps] YC-156 grid ring, Andy GD0TEP, 02:48
Re: [Amps] 8877 dishwasher?, Gudguyham, 01:24
[Amps] 8877 dishwasher?, Ed Stallman, 00:56

April 02, 2008

Re: [Amps] 4pr1000 bias question, jeremy-ca, 23:34
Re: [Amps] 4pr1000 bias question, k7fm, 23:11
Re: [Amps] YC-156 grid ring, Norman Hockler, 22:42
Re: [Amps] 4pr1000 bias question, jeremy-ca, 22:10
Re: [Amps] 4pr1000 bias question, k7fm, 21:11
[Amps] K8RR & Pin Diodes, K8MZ, 20:29
[Amps] Ameritron QSK-5 with Alpha 91b or 99?, John, 20:20
[Amps] YC-156 grid ring, Andy GD0TEP, 19:18
Re: [Amps] Where do you buy tubes, jeremy-ca, 18:23
Re: [Amps] Relays, jeremy-ca, 18:05
[Amps] MRF317, John Lyles, 18:03
Re: [Amps] Amps Digest, Vol 64, Issue 5, jeremy-ca, 17:48
Re: [Amps] Where do you buy tubes, Steve Katz, 17:44
Re: [Amps] 4pr1000 bias question, jeremy-ca, 17:37
Re: [Amps] Relay problems, jeremy-ca, 17:34
[Amps] Where do you buy tubes, Lee Buller, 17:30
Re: [Amps] Relays, John/K4WJ, 16:34
Re: [Amps] Amps Digest, Vol 64, Issue 5, Mike Willis, 16:24
[Amps] 4pr1000 bias question, Andy GD0TEP, 16:21
[Amps] Relay problems, Dan Hearn, 15:57
Re: [Amps] Relays, Alex, 15:30
[Amps] FS: NEW MRF317 transistors, JimMoci, 15:26
Re: [Amps] Relays, Alex, 15:20
Re: [Amps] Relays, Pat Barthelow, 15:01
Re: [Amps] Relays, TexasRF, 15:00
Re: [Amps] Relays, Vic K2VCO, 14:42
Re: [Amps] Relays, jeremy-ca, 14:39
Re: [Amps] Relays, Paul Christensen, 13:46
Re: [Amps] Relays, Roger (K8RI), 13:46
Re: [Amps] Relays, Vic K2VCO, 12:05
Re: [Amps] Relays, Greg - AB7R, 10:37
Re: [Amps] Relays, Paul Christensen, 10:33
Re: [Amps] Relays, Harold Mandel, 10:07
Re: [Amps] Relays, John/K4WJ, 09:51
Re: [Amps] Relays, jeremy-ca, 09:46
Re: [Amps] Relays, R.C. Morris, 09:37
Re: [Amps] Relays?? Try this sight, Theo Bellamy, 08:28
Re: [Amps] Relays, Alex, 05:59
Re: [Amps] Relays, d.cutter, 05:29
Re: [Amps] Relays, Alex, 02:41

April 01, 2008

Re: [Amps] Relays, Kim Elmore, 21:47
Re: [Amps] Relays?? Try this sight, Dan Hearn, 20:25
[Amps] Relays?? Try this sight, k1um, 20:02
Re: [Amps] Relays, Vic K2VCO, 19:28
[Amps] more relays, kg7hf, 18:20
[Amps] 425 titan, W1dxh, 17:04
Re: [Amps] EMI Filtering, Jim Brown, 16:20
Re: [Amps] EMI Filtering, K6QD, 15:30
[Amps] Transformer for GLA1000 Needed, Adrian Rees, 15:06
[Amps] spare parts for selling, Vladimir UX3LV, 14:56
Re: [Amps] Relays, wa9jml, 14:50
[Amps] re hv ps for 8877 amp, Fern Rivard, 14:38
Re: [Amps] more Relays, jeremy-ca, 11:00
Re: [Amps] more Relays, kg7hf, 10:06
[Amps] relays, Dick Hanson, 09:58
Re: [Amps] EMI Filtering, jeremy-ca, 09:47
Re: [Amps] more Relays, n8de, 09:45
[Amps] more Relays, kg7hf, 09:33
[Amps] 4CX1500B cathode tuned input, Paul Kelley N1BUG, 09:25
Re: [Amps] Amp Repair Services, jeremy-ca, 08:55
Re: [Amps] SB-220 Panel Meters..., jeremy-ca, 08:50
Re: [Amps] SB220 "A" Mods, jeremy-ca, 08:27
[Amps] Pi Networks, Roger D Johnson, 08:20
[Amps] EMI Filtering, Steve Flood, 07:58
[Amps] Fwd: 425 titan, W1dxh, 06:41
Re: [Amps] Amps Digest, Vol 63, Issue 56, David Cutter, 02:19
Re: [Amps] Amp Repair Services, n8de, 01:51
[Amps] Amp Repair Services, MIKEHAACK, 00:34