Amps
[Top] [All Lists]

Re: [Amps] YC-156 grid ring

To: "'Phil Clements'" <philc@texascellnet.com>, "'Norman Hockler'" <sanorm@columbus.rr.com>, <amps@contesting.com>
Subject: Re: [Amps] YC-156 grid ring
From: "Andy GD0TEP" <andy@gd0tep.com>
Reply-to: andy@gd0tep.com
Date: Thu, 3 Apr 2008 19:59:39 +0100
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Don't think so Phil,

I had these made as they saved me cutting the chassis by hand, and drilling
the holes etc..

Andy
http://gd0tep.com


-----Original Message-----
From: Phil Clements [mailto:philc@texascellnet.com] 
Sent: 03 April 2008 17:31
To: 'Norman Hockler'; andy@gd0tep.com; amps@contesting.com
Subject: RE: [Amps] YC-156 grid ring

I just bolt my YC-156's directly to the chassis. Did I make a boo boo???

Phil, K5PC


Subject: Re: [Amps] YC-156 grid ring


Do you mean "mounting plates"

N8NH

At 07:20 PM 4/2/2008, Andy GD0TEP wrote:
>Hi group,
>
>I recently had some aluminium grid rings laser cut for the YC-156. As there
>was a minium order, I now have some pare.
>
>They are on ebay if anyone is interested.       Item number: 330225029167
>
>Cheers,
>
>Andy
>http://gd0tep.com
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>