Hi Andy and all....
I used locktite brand cyanacrolate (crazy glue) on my bandswitch that
was broken in half.
I used an old ceramic tile that I broke and reglued then I put it in the
microwave
for 5 minutes on high.
When I took it out I had to use oven mitts as the tile was too hot to
handle bearhanded.
I tried to break it and wound up breaking the tile away from the
original, reglued break.
I did this while still hot.
I glued the switch and reassembled the amp.... Still working a year
later.....
George NE2I
Andy Pfeiffer wrote:
> The band switch in my Alpha 76 has a small crack near one of the
> mounting screws.
> The crack is barely visible. It is about one half inch long.
> I am thinking of applying some kind of crazy glue to the crack.
>
> Any suggestion what kind of glue to use?
>
> Andy - VA3PL
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|