Paul Christensen wrote:
>> The RJ-1 type of relay can also be completely silent if you mount it
>> with a few drops of silicone seal or on a piece of soft rubber. Mount it
>> directly to metal if you like to hear it click!
>
> Good suggestion, Vic. Although typically, that's half the solution.
> Generally, cabling going to the relay's pins contributes much to sound
> conductivity.
Yes, absolutely. I forgot to mention that I make connections to the
relays with thin strips of copper foil (0.002" thick, cut to about 1/8"
width). I bought a big roll of this at a hobby shop. The connection
should have a little slack in it.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|