He wants to cover the world like a can of Sherwin-Williams paint
3's & such,
Gary...wa6fgi
----- Original Message -----
From: DAVE WHITE
To: amps@contesting.com ; Steve Cook
Sent: Saturday, February 28, 2009 7:43 AM
Subject: Re: [Amps] Transformer Update
7kV at 3 amps? Bloody hell, what are you building? Remind me to buy stock in
your local power company.
cheers
Dave G0OIL
--- On Sat, 28/2/09, Steve Cook <sccook1@cox.net> wrote:
From: Steve Cook <sccook1@cox.net>
Subject: [Amps] Transformer Update
To: amps@contesting.com
Date: Saturday, 28 February, 2009, 3:00 AM
Just a heads up to the group...
I have been working with Harbach for a couple of weeks trying to come up with
a
20 to 30 KVA transformer they could build -- you know, a 250 to 450 pound
hypersil like Peter used to build all the time.
At first I was told that he could build me a 250LB transformer for about
$1500. Then he said that it might be closer to $2000.
Today he told me could not build me a 250 pounder -- get this... 7000V at 3A
for anything less than $4000. He said the A-0550 core alone is $2000.
Bottom line -- Jeff may own the rights to the Dahl designs, but he doesn't
have the faintest clue what to do with them. I get the impression he is
scared
to death to build a big transformer.
He spends more time telling you what he can't do, rather than what he can
do.
Better look around if you are looking for big iron -- Harbach is a dead end...
-Steve (((WG7K)))
Tucson, AZ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|