Hi All,
Yes, it works A-OK for me now --- musta been either a gremlin(!), or our
dial-up server here...
~73~ Eddy VE3CUI - VE3XZ
*************************************************
----- Original Message -----
From: KD7QAE
To: Edward Swynar
Cc: amps@contesting.com
Sent: Sunday, March 01, 2009 10:34 AM
Subject: Re: [Amps] house cleaning AMP parts for sale
I just tried the link and it works. One other person is viewing it as well
so that confirms it is public too. Please try again, Edward.
Tomm
Edward Swynar wrote:
Hi All,
I tried that web page listed below, but all I get back is "...can not be
found."
http://spreadsheets.google.com/ccc?key=pgAd1PO-wiqDBz0lSssZgPw
Is this address missing something, or am I...?
~73~ Eddy VE3CUI - VE3XZ
*************************************
----- Original Message -----
From: "KD7QAE" <KD7QAE@ARRL.NET>
To: <amps@contesting.com>
Sent: Saturday, February 28, 2009 5:07 PM
Subject: Re: [Amps] house cleaning AMP parts for sale
Here is the inventory list with prices:
http://spreadsheets.google.com/ccc?key=pgAd1PO-wiqDBz0lSssZgPw
KD7QAE wrote:
All,
I have sold the Alpha77s transformer and the WD7S Bias Control board.
All the rest is still available, including the GS35b tubes and custom
mounts, PS parts, RF deck parts and tuned input parts. Pictures of some
of the goodies are at
http://picasaweb.google.com/taldridge/AmpParts?authkey=Gv1sRgCM3s-Y23loKI6AE
&feat=directlink
and the complete list with my asking prices will be supplied when you
contact me.
Tomm
KD7QAE wrote:
I have a very complete set of parts for a single or dual GS35 amplifier
which need a new home.
4kV Power supply including HV rectifier and metering PCB built and
tested & Power transformer, high quality C core unit
Power input socket for 230VAC, EMI/RFI line filter, HD 2 pole
contactors
w/ 24V coils, SSRs for inrush control
Amplifier control board, built and tested
Power transformers for 24V bias and control
HV plate and tuning vacuum variable caps
HV bypass capacitors
HV tank switching vacuum relays
2 large ceramic for high power tank coils (tapped)
Plate choke, built and characterized for SRF peaks
2 GS35b tubes with custom machined aluminum mounts and hardware
2 stepper motors and a stepper motor driver intended for turning the
capacitor shafts
Misc meters, connectors and bits and pieces
contact me off list for questions regarding this treasure trove.
KD7QAE
Tomm Aldridge
taldridge"AT"gmail.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|