I don't get it. Why not just Google "silver epoxy"? You get a ton of hits. This
stufff is easy to find.
Bill W5WVO
Alex wrote:
> Try the Stepan Company. They used to manufacture a few kinds of
> silver epoxy years ago
> Alex 4Z5KS
>
> -----Original Message-----
> From: amps-bounces@contesting.com
> [mailto:amps-bounces@contesting.com] On Behalf Of Carl
> Sent: Thursday, May 28, 2009 2:05 AM
> To: Herzog; Ham-amps
> Subject: Re: [Amps] Silver epoxy yes
>
> Silver epoxy is still around. We used it to seal microwave modules
> prior to going in the oven were it was cured and the modules then
> final tested and shipped.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "Herzog" <herzog@frontiernet.net>
> To: "Ham-amps" <amps@contesting.com>
> Sent: Wednesday, May 27, 2009 9:16 PM
> Subject: [Amps] Silver epoxy yes
>
>
>> RE: n Wed, May 27, 2009 at 10:44:44AM -0500, Roy wrote:
>>>> "The piece that broke off fits into a well about 1/2" deep. No iron
>> I have
>>>> will reach it."
>>>>
>>>> 73, Dick, W1KSZ
>> =========
>> 25 years ago, there was a silver epoxy, that is silver particles in
>> the mix. We had a broken capacitor like that, and a brighit tech
>> tried "epoxy-ing" it. The thing worked. It had poor clading as
>> built, hence the failure. It carried 100 amperes RF at 30 MHz. I
>> am still amazed. K2LB
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|