Re: [Amps] HV Measuring.

["Bill, W6WRT" <dezrat1242@yahoo.com>]

ORIGINAL MESSAGE:

On Sun, 16 Aug 2009 22:03:04 -0700, MIKE DURKIN <patriot121@msn.com> wrote:

>I ran my amp off of 120V(125V actually) instead of 240V and the lowest cap had 
>196V across it. ok that means that at 240V it would be running at the max 
>rated supply voltage ( it only has 400V caps - bummer -

REPLY:

By my calculations, 240 VAC would give you 376 VDC across the caps. You're ok.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps