Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] SB-220 bias question

from [Gudguyham] [Permanent Link][Original]
To: Gudguyham@aol.com, amps@contesting.com
Subject: Re: [Amps] SB-220 bias question
From: Gudguyham@aol.com
Date: Sat, 29 Aug 2009 07:14:43 EDT
List-post: <amps@contesting.com">mailto:amps@contesting.com> 

In a message dated 8/29/2009 4:08:55 A.M. Pacific Daylight Time,  
Gudguyham@aol.com writes:

to short  out 4 of the diodes on CW to lower the idle current and have 
normal SSB   idle 
 
CORRECTION:  Should have been short out 4 diodes on SSB....sorry



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Amps] SB-220 bias question, Gudguyham
Next by Date:  Re: [Amps] SB-220 bias question, Carl
Previous by Thread:  Re: [Amps] SB-220 bias question, Bill, W6WRT
Next by Thread:  Re: [Amps] SB-220 bias question, Gudguyham
Indexes:  [Date] [Thread] [Top] [All Lists]