At 05:04 PM 30/01/2010, Jim Thomson wrote:
>## for a good hb amp... the 3CX-3000A7 is superb. The 225
>watt CCS grid can be used as
>a dummy load for ur 200 w xcvr ! IMD is superb. 50 watts of
>drive = 1.5 kw out 100 w of
>drive = 2.5 kw out, etc. Since the grid is bonded to the cold
>chassis, actual CCS grid diss is a lot
>more than 225 W.
G'day Jim
What sorta anode volts did you run to get those output figures?
I have a known good 3CX3000A7 pull here as well as the filament
tranny and perhaps one day. . . . . .
73, Alek.
http://www.qrz.com/db/vk6apk
http://www.qrz.com/db/vk6py
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|