In the past when I have had similar symptoms it was the plate xmfr shorted.
Both of these instances were Henry desktop amps, one a 1KD-5 and the other a
2KD-5. You need to start unloading, ie, unload the secondary of the plate xmfr
and see if it still blows fuses.
Lane
Ku7i
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of DALE LONG
Sent: Wednesday, March 17, 2010 8:13 PM
To: amps@contesting.com
Subject: [Amps] 91B problem in Paraguay
Turned on my hosts amp this morning and tripped the 2amp slow-blow fuse...Got
more fuses this afternoon and same thing keeps happening.
Seemed to shut down normally althought there may have been a problem with a
sticky T/R relay before turning off the amp.
Any ideas what could be causing the 2 amp fuses to blow when turning on the
switch?
Thanks
Dale ZP6/N3BNA
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|