Amps
[Top] [All Lists]

[Amps] Helping a Uruguayan Ham build an Amp.

To: <amps@contesting.com>
Subject: [Amps] Helping a Uruguayan Ham build an Amp.
From: Patrick Barthelow <apolloeme@live.com>
Date: Sun, 25 Apr 2010 10:15:47 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Folks,

 

Back to the list after a long layoff...

I am helping a brilliant, motivated, YL ham in Uruguay, achieve her dream of 
going

QRO at her existing HF station. She is a CW/DX/Contest Specialist. I have 
many/most of the components, (chokes, roller inductors, PI net components, 
coupling caps, etc)  to build a  2 x 3-500Z class amp that I can ship to her, 
for constuction of such an amp.  I also have a few of the heavy pieces, (5 v 30 
amp fil xfmr) and a Plate transformer, but want to see if any QRO types read 
the list, from "near" her location that might be able to help source the 
"heavies".  She lives in Salto Uruguay, about 300 mi north of the Buenos Aires 
area, and chances are there are some hams there, or maybe in Montevideo,  that 
might have parts, or basket case homebrew/commercial amps, that might want to 
sell or donate them or parts to a good cause.   Perhaps some radio station 
engineers/hams in Uruguay, or BA area of Argentina that may have some 2KW level 
components (esp B+ transformer) sitting on the floor  in some station parts 
storage sheds.  Maybe I can get lucky and find a QRO ham in the re
 gion who has some Vac Variable, tune and load caps for the amp.

 

This YL ham truly amazes me, with her motivation, and drive to be tops in HF 
from that region.  She comes from a ham family with several of her family also 
hams that can mentor her in construction of the amp.  

I wonder if anyone has a chassis layout drawing of the classic 2 x 3-500Z  GG 
amp such as Eimac featured for years in their app notes.  (Socket placement, 
xfmrs, Caps, etc.

 

I wonder also, as long as we are looking at a clean sheet for the PS and amp 
design, what the higher B+ voltage is to design to, to max out tube efficiency 
for 1.5KW from a pair of 3-500s.  Maybe 4KV?

Maybe even use the similarly capable 4-400As  that used to be used in old 
commercial stations of about 2 KW level, that can be had maybe for cheap.  They 
are happier I think at the higher B+ voltages.

 

Then even the possibility of choosing  a GS 35B tube as as the basis of the 
amp.  They used to be very cheap for NOS tubes, in original boxes, maybe still 
are.

 

Any thoughts?

Best Regards,   
73, de Pat Barthelow AA6EG   apolloeme@live.com 
 

                                          
_________________________________________________________________
Hotmail is redefining busy with tools for the New Busy. Get more from your 
inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>